Table of Contents
Advertisement
6.
Installation
®
This section describes the procedure when installing the BACnet
Gateway software to the PC which con-
nects directly to the VRF network. The PC communicates directly with the indoor and outdoor units.
The PC and VRF network are connected by a Transmission Adaptor (U10 USB Network Interface).
®
This section also describes how to uninstall the software when BACnet
Gateway software becomes un-
necessary and also, how to reinstall the installed software due to software upgrading or other reasons.
Copyright© 2010-2017 Fujitsu General Limited. All rights reserved.
14
Advertisement
Table of Contents
