Getting Started - Motorola L404C User Manual

Doc Title : Product Data - User Manual
Model : Motorola Active Pro (L402C)
1

GETTING STARTED

WARNING
Do not place your phone in the bathroom or other humid areas.
Location
When choosing a location for your new phone, here are some important guidelines you should consider:
• Avoid sources of noise and heat, such as motors, fluorescent lighting, microwave ovens, heating appliances and
direct sunlight.
• Avoid areas of excessive dust, moisture and low temperature.
• Avoid other cordless telephones or personal computers.
• Never install telephone wiring during a lightning storm.
• Never install telephone jacks in wet locations unless the jack is specifically designed for wet locations.
• Never touch non-insulated telephone wires or terminals, unless the telephone line has been disconnected at the
network interface.
• Use caution when installing or modifying telephone lines.
HANDSET RANGE
Optional range is reached when there are no other electrical appliances working within the range area. Any
obstruction between the base and handset will also reduce the significantly.
SIGNAL STRENGTH
When out of range of the base, the screen shows SEARCHING.... If you are on a call, the line will hang up. Move
back within in range. The handset will automatically re-connect to the base.
Setting up
IMPORTANT
The base station must be plugged into the electrical outlet at all times. Do not connect the telephone line cord into
the wall jack until the handset is fully charged. Only use the power adapter and telephone line cord supplied with
the product.
WHICH POWER ADAPTER?
The power adapter with the smaller pin is for the base unit and the power adapter with the bigger pin is for the
charger unit.
Install and charge the handset battery pack
1. Slide out the battery compartment cover.
2. Place the supplied rechargeable battery pack in the battery compartment.
3. Slide the battery compartment cover back.
4. Put the handset on the base to charge for at least 24 hours. When the handset is fully charged the <Battery
icon> will indicate that it is fully charged.
5. Use only the rechargeable battery pack provided.
BATTERY LOW WARNING
If the <Battery icon> flashes in the display, you will need to recharge the handset before you can use it again.
During charging, the <Battery icon> will scroll in the display.
This document contains confidential and proprietary information of VTech Telecommunications Ltd
Revision :
Page(s) :
R.00
9 of 46