Canon PowerShot V10 Advanced User's Manual page 67

Table of Contents

Advertisement

Note
Audio is also output when the camera is connected to televisions via HDMI, unless
[Sound recording] is set to [Disable]. In case of feedback from television audio
output, move the camera away from the television or turn down the volume.
The volume balance between L/R (left/right) cannot be adjusted.
Sound Recording/Sound-Recording Level
Auto
The sound-recording level is adjusted automatically. Auto level control will take effect
automatically in response to the sound level.
Manual
You can adjust the sound-recording level as needed. Select [Rec. level] and press the
<
> <
> keys while looking at the level meter to adjust the sound-recording level.
Look at the peak hold indicator, and adjust so that the level meter sometimes lights up
on the right of the "12" (–12 dB) mark for the loudest sounds. If it exceeds "0," the sound
will be distorted.
You can adjust the recording level during recording by tapping [
Disable
Sound will not be recorded.
67
].

Advertisement

Table of Contents
loading

Table of Contents