Canon PowerShot V10 Advanced User's Manual page 178

9.
Establish a Wi-Fi connection.
Wi-Fi connection via an access point
Before following these steps, make sure the smartphone or computer is connected to the
access point via Wi-Fi or a wired connection.
1.
Select [Connect].
When the screen above appears on the camera, use the smartphone,
computer, or other device to access the indicated URL from the
application developed for camera control.
Display of the screen above on the camera indicates that a Wi-Fi
connection has been established.
To end the Wi-Fi connection, select [Disconnect].
After the camera is disconnected from Wi-Fi, this connection is
registered.
178