CONTENTS 9.6 Making coffee using pre-ground coffee ..15 10. MAKING CAPPUCCINOS AND MILK-BASED 1. FUNDAMENTAL SAFETY WARNINGS ....7 COFFEES ..........15 2. SAFETY WARNINGS ........8 10.1 Filling and attaching the milk container ..15 2.1 Symbols used in these instructions ....8 10.2 Regolare la quantità...
1. FUNDAMENTAL SAFETY WARNINGS • The appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
2. SAFETY WARNINGS Any other use is considered improper and thus dangerous. The manufacturer is not liable for damage deriving from improper 2.1 Symbols used in these instructions use of the appliance. Important warnings are identified by these symbols. It is vital to respect these warnings.
You can also create up to 6 new beverages and save them in your B15. COFFEE appliance. B16. LONG Please note: B17. DOPPIO+ Check compatible devices on “PrimaDonnaElite.delonghi.com”. 4.3 Description of the accessories 4. DESCRIPTION (page 2 - C ) 4.1 Description of the appliance C1. “Total Hardness Test” indicator paper (page 3 - A ) C2.
Do not install the appliance in a room where the tempera- Please note! ture could drop below freezing point. • When setting up the appliance, you need to make 4-5 cups • Arrange the cord in such a way that it cannot be damaged of coffee or 4-5 cappuccinos before the appliance starts to by sharp edges or contact with hot surfaces (e.g.
• release the main switch (A21) at the back of the appliance 2. Scroll through the menu items by pressing the selection (fig. 2). arrow corresponding to “NEXT>” until “ BEVERAGES SETTINGS” appears on the display; Important! 3. The values for the first beverage appear on the display; Never press the main switch while the appliance is on.
1. Press the selection arrow (B2) corresponding to the “ 4. Press the selection arrow corresponding to “ ESC” to go ” symbol (B8) to enter the menu; back to the homepage. 2. Scroll through the menu items by pressing the selection arrow corresponding to “NEXT>”...
3. Press the selection arrow corresponding to “SET LANGUAGE 4. Press the selection arrow to disable ( ) or enable ( ”; the request for the PIN when you connect via the APP; 4. Press the selection arrow corresponding to the language re- 5.
3. Press the selection arrow corresponding to “ STATISTICS” Please note! and check all the statistics by scrolling through the items The grinding adjustment dial must only be turned when the using the selection arrow corresponding to “NEXT>”; coffee mill is in operation. 4.
Halfway through preparation, the message “ADD GROUND COF- • While the machine is making coffee, delivery can be in- terrupted at any moment by pressing the selection arrow FEE” is displayed. Add one level measure of pre-ground coffee corresponding to “STOP “. and press “OK ”...
• At the end of delivery, to increase the quantity of coffee in the cup, press the selection arrow corresponding to “ 10.2 Regolare la quantità di schiuma EXTRA”. Turn the froth adjustment dial (D1) to adjust the amount of froth •...
1. Make sure the hot water/steam spout (C6) is attached cor- Please note! rectly to the hot water/steam connection nozzle (A9); If “Energy Saving” mode is active, you may have to wait a few 2. Place a container under the spout (as close as possible to seconds before the hot water is delivered.
• You can rename your personal profile by connecting with Important! Danger of burns the DeLonghi Coffee Link App (only the first 3 characters If you make a number of cappuccinos one after the other, the will be shown). metal cup tray (A11) becomes hot. Wait for it to cool down be- fore touching it and handle it from the front only.
When removing the drip tray, the grounds container must be 15.8 Cleaning the pre-ground co ee funnel emptied, even if it contains few grounds. If this is not done, Check regularly (about once a month) that the pre-ground when you make the next coffees, the grounds container may fill coffee funnel (A4) is not blocked.
15.11 Cleaning the hot water/steam connection nozzle 15.10 Cleaning the milk container Each time you prepare milk, clean the connection nozzle (A9) To keep the frother efficient, clean the milk container (D) every with a sponge to remove milk residues from the gaskets (fig. 22). two days as described below: 1.
arrow corresponding to 12. “INSERT FILTER INTO ITS “NEXT>”; HOUSING” (fig. 48). Press 5. “EMPTY DRIP TRAY” (fig. “NEXT>” and extract the 47): Remove, empty water tank. Replace the and replace the drip water softener filter if tray (A14) and grounds removed previously;...
3. Remove the paper from the water and shake lightly. After 4. TURN DATE INDICATOR TO NEXT 2 MONTHS” (fig. 41): about a minute, 1, 2, 3, or 4 red squares form, depending turn the date disk to dis- on the hardness of the water. Each square corresponds to play the next two months one level.
The filter is now active and you can use the coffee machine. 19. TECHNICAL DATA Voltage: 220-240 V~ 50/60 Hz max. 10 A 18.2 Replacing the filter Power: 1450 W Pressure: 1,5 MPa (15 bar) Replace the filter (C4) when “REPLACE WATER SOFTENER FILTER, Water tank capacity: PRESS OK TO START ”appears on the display (B).
DISPLAYED MESSAGES DISPLAYED MESSAGE POSSIBLE CAUSE SOLUTION FILL TANK WITH FRESH Insufficient water in the tank (A16). Fill the tank with water and/or insert it cor- WATER rectly, pushing it as far as it will go until it clicks into place. INSERT WATER TANK The tank (A16) is not correctly in place.
Page 25
ADD GROUND COFFEE MAX. A LONG coffee with pre-ground coffee has been Place pre-ground coffee in the funnel (A4) (fig. ONE MEASURE requested 13) and press “OK ” to continue and complete delivery. FILL BEANS CONTAINER The coffee beans have run out. Fill the beans container (A3-fig.
Page 26
INSERT WATER SPOUT The hot water spout (C6) is not inserted or is Insert the water spout as far as it will go. inserted incorrectly INSERT MILK CONTAINER The milk container (D) is not inserted correctly. Insert the milk container as far as it will go (fig. 18).
Page 27
TURN MILK FROTH Milk has been delivered recently and the tubes Turn the froth adjustment dial (D1) to CLEAN ADJUSTMENT DIAL TO CLEAN inside the milk container (D) must be cleaned. (fig. 20). POSITION CLEAN TURN THE MILK FROTH The milk container has been inserted with Turn the dial to the required froth position.
The machine must be descaled. The descaling procedure described in section “16. Descaling” needs to be performed as soon as possible. The auto-start function is enabled. To disable the function, proceed as described in section “8.6 Auto-start ”. Energy saving is enabled. To disable the function, proceed as described in section “8.9 Energy saving ”.
Page 29
Coffee does not come out of one or The coffee spouts (A8) are blocked. Clean the spouts with a toothpick (fig. 36B). both of the spouts. The appliance does not come on The power cord (C8) connector is not Insert the connector as far as it will go in the inserted correctly.
23. ELECTRICAL CONNECTION (UK ONLY) Before using this appliance ensure that the voltage indicated on the product corresponds with the main voltage in your home, if you are in any doubt about your supply contact your local electricity company. The flexible mains lead is supplied connected to a B.S. 1363 fused plug having a fuse of 13 amp capacity. Should this plug not fit the socket outlets in your home, it should be cut off and replaced with a suitable plug, following the procedure outlined below.
Need help?
Do you have a question about the PRIMADONNA ELITE ECAM 650.85.MS and is the answer not in the manual?
Questions and answers