Related Manuals for Beko CM 8101 T
Summary of Contents for Beko CM 8101 T
- Page 1 Washing Machine User Manual CM 8101 T Document Number: 2820530392_EN/ 25-07-22.(21:00)
-
Page 2: General Safety Instructions
1 General safety instructions • Do not force open the locked loading door. The door will This section includes security open immediately after the instructions which may help prevent washing cycle has ended. If the the injuries and material damage risks. door does not open, apply the All kinds of warranties shall be invalid if solutions provided for “Loading... -
Page 3: Children's Safety
1.3 Children’s safety CAUTION! • Do not forget to close the CAUTION! loading door when leaving the • This product can be used room where the product is by children at and above 8 located. years old and by persons •... -
Page 4: Important Instructions For Environment
This product has been manufactured with high DANGER quality parts and materials which can be reused and are suitable for recycling. Do not dispose • Do not wash the product by of the waste product with normal domestic spraying or pouring water onto and other wastes at the end of its service life. -
Page 5: Technical Specifications
4 Technical specifications Beko Supplier name or trademark CM 8101 T Model name 7144940200 Rated capacity (kg) 1000 Maximum spin speed (rpm) Built-in Height (cm) Width (cm) Depth (cm) Single Water inlet / Double Water inlet • / - • Available... -
Page 6: Appropriate Installation Location
4.1 Installation • Leaving a gap at the sides of the machine is suggested to reduce vibration and noise INFORMATION • On a graduated floor, do not place the product next to the edge or on a platform. • Your washing machine automatically •... -
Page 7: Connecting Water Supply
4.1.4 Connecting water supply CAUTION! INFORMATION • Your drain house will be flooded if the • It is necessary to have 10 – 80 liters of hose comes out of its housing during water flowing from the fully open tap in water discharge. -
Page 8: Electrical Connection
4.1.6 Adjusting the feet 4.1.8 Initial use Before starting to CAUTION! use the product • In order to ensure that the product make sure that operates more silently and vibration- the preparations free, it must stand level and balanced are made which on its feet. -
Page 9: Loading The Laundry
• Wash “Machine washable” or “Hand are caught in the door. The loading door is washable” labelled products only with an locked while a programme is running. The appropriate programme. door lock will open immediately after the washing programme has ended. Then you •... - Page 10 • In a programme with prewash, do not Pour the softener into the softener put liquid detergent into the prewash compartment of the detergent drawer. compartment (compartment no. "1"). • Do not exceed the (>max<) level sign on the • Do not select a programme with prewash if softener compartment.
- Page 11 Using gel and tablet detergent Using bleaches • If the gel detergent thickness is fluidal and • Select a programme with prewash and add the your product does not contain a special bleach at the beginning of the prewash. Do not liquid detergent container, put the gel put detergent in the prewash compartment.
-
Page 12: Tips For Efficient Washing
4.2.7 Tips for efficient washing Clothes Light Colours and Black/Dark Delicates/ Colours Whites Colours Woollens/Silks (Recommended (Recommended (Recommended temperature (Recommended temperature temperature range temperature range range based on soiling level: range based on soiling level: based on soiling based on soiling 40-90 oC) cold-40 oC) level: cold -40 oC) -
Page 13: Operating The Product
4.3 Operating the product 1 - Programme Selection Knob (Uppermost position On / Off) 4.3.1 Control panel 2 - Display 3 - End Time Adjustment Button 4 - Programme Follow-up Indicator 5 - Start/Pause Button 6 - Auxiliary Function Button 3 7 - Auxiliary Function Button 2 8 - Auxiliary Function Button 1 9 - Spin Speed Adjustment Button... -
Page 14: Main Programmes
• : Selectable * : Automatically selected, cannot be cancelled. ***: Eco 40-60 with 40 °C temperature selection is the test programme in accordance with EN 60456:2016/A11:2020 and energy label with Commission Delegated Regulation (EU) 2019/2014 - : See the programme description for maximum load. INFORMATION •... -
Page 15: Additional Programmes
• Katoen (Cottons) Use this programme for your laundry (baby clothes, bed sheets, bedlinen, underwear, etc. You can wash your durable cotton laundry cotton items) for which you require an anti- (sheets, bedlinen, towels, bathrobes, underwear allergic and hygienic washing at high temperature etc.) in this programme. - Page 16 • Hemden (Shirts) CAUTION! This programme is used to wash the shirts made from cotton, synthetic and synthetic • Do not use the washing machine blended fabrics altogether. It reduces wrinkles. to wash materials such as carpets, Steam is applied at the end of the programme to rugs etc.
- Page 17 4.3.7 Special programmes Rinse hold If you are not going to unload your clothes For specific applications, select any of the immediately after the programme ends, you can use following programmes. rinse hold function to keep your laundry in the final •...
- Page 18 4.3.10.1 Auxiliary functions INFORMATION Voorwas (Prewash) • • This is not a washing programme. A Prewash is only worthwhile for heavily soiled It is a maintenance programme. laundry. Not using the Prewash will save • Do not run this programme when there are energy, water, detergent and time.
- Page 19 Changing the delayed end time • AntiCrease+ If you want to change the time during countdown: If you press and hold the auxiliary function button Turn the programme selection knob to cancel the 3 for 3 seconds, this function will be selected delayed end time function, and then set the desired and the programme follow-up light of the relevant time again.
-
Page 20: Loading Door Lock
You can change the auxiliary functions, speed and temperature settings without stopping the programme flow while the programme is running. To do this, the change you are going to make must be something that will be carried out after the programme step that is running. If the change is not suitable, relevant lights will flash 3 times. -
Page 21: Cancelling The Programme
Changing the auxiliary function, speed and 4.3.17 End of programme temperature At the end of the programme, “End” will be displayed. Depending on the step the programme has reached, you can cancel or select auxiliary 1. Wait until the light of the loading door goes functions. -
Page 22: Maintenance And Cleaning
4.4 Maintenance and cleaning INFORMATION Service life of product extends and frequently • Foreign metal substances will cause experienced problems will be reduced if it is rust stains in the drum. Clean the cleaned at regular intervals. stains on the drum surface by using 4.4.1 Cleaning the detergent drawer cleaning agents for stainless steel. -
Page 23: Draining Remaining Water And Cleaning The Pump Filter
4.4.5 Draining remaining water 3 Follow the below procedures in order to drain water. and cleaning the pump filter The filter system in your machine prevents solid items such as buttons, coins and fabric The product does not have an emergency fibres clogging the pump impeller during water drain hose, in order to drain the water: discharge of washing water. -
Page 24: Troubleshooting
5 Troubleshooting Loading door cannot be opened. • Loading door lock is activated because of the water level in the product. >>>Drain the water by running the Pump or Programmes do not start after the loading door is Spin programme. closed. - Page 25 Washing performance is poor: Laundry turns gray. (**) Washing machine does not rinse well. • Insufficient amount of detergent has been used over a long • The amount, brand and storage conditions of the detergent period of time. >>>Use the recommended amount of used are inappropriate.
- Page 26 (*) The product does not switch to spinning • Regular drum cleaning is not applied. >>>Clean the drum step when the laundry is not evenly distributed regularly. For this procedure, please see "Cleaning the loading door and the drum". in the drum to prevent any damage to the Too much foam forms inside the product.
Need help?
Do you have a question about the CM 8101 T and is the answer not in the manual?
Questions and answers