Related Manuals for Beko CM 9101
Summary of Contents for Beko CM 9101
- Page 1 Washing Machine User Manual CM 9101 Document Number: 2820529377_EN/ 19-01-22.(17:11)
-
Page 2: General Safety Instructions
1 General safety instructions • Do not force open the locked loading door. The door will This section includes security open immediately after the instructions which may help prevent washing cycle has ended. If the the injuries and material damage risks. door does not open, apply the All kinds of warranties shall be invalid if solutions provided for “Loading... -
Page 3: Children's Safety
1.3 Children’s safety CAUTION! • Do not forget to close the CAUTION! loading door when leaving the • This product can be used room where the product is by children at and above 8 located. years old and by persons •... -
Page 4: Important Instructions For Environment
This product has been manufactured with high DANGER quality parts and materials which can be reused and are suitable for recycling. Do not dispose • Do not wash the product by of the waste product with normal domestic spraying or pouring water onto and other wastes at the end of its service life. -
Page 5: Technical Specifications
4 Technical specifications Beko Supplier name or trademark CM 9101 Model name 7150240200 Rated capacity (kg) 1000 Maximum spin speed (rpm) Built-in Height (cm) Width (cm) Depth (cm) Single Water inlet / Double Water inlet • / - • Available... -
Page 6: Appropriate Installation Location
4.1 Installation 4.1.3 Removing the transportation locks • Apply to the nearest authorised service agent for the installation of your product. 1. Loosen all bolts with an appropriate wrench until they turn freely. • Preparation of the location and electrical, tap water and waste water installations at 2. -
Page 7: Connecting The Drain Hose To The Drain
• In case the drain hose is elevated after laying it on the floor level or close to the ground (less than 40 cm above the ground), water discharge becomes more difficult and the laundry may come out excessively wet. Therefore, follow the heights described in the figure. -
Page 8: Electrical Connection
4.2 Preparation 4.1.7 Electrical connection Connect the product to a grounded outlet 4.2.1 Sorting the laundry protected by a 16 A fuse. Our company shall • Sort laundry according to type of fabric, not be liable for any damages that will arise colour, and degree of soiling and allowable when the product is used without grounding in water temperature. -
Page 9: Loading The Laundry
4.2.3 Tips for energy and water saving 4.2.6 Using detergent and softener Following information will help you use the product in an ecological and energy/water- INFORMATION efficient manner. • When using detergent, softener, starch, • Operate the product in the highest load fabric dye, bleach and descaling agents;... - Page 10 Choosing the detergent type If the product contains a liquid detergent cup: Detergent type to be used depends on the • Put the liquid detergent container into the washing programme, fabric type and colour. compartment no “2”. • Use different detergents for coloured and •...
- Page 11 directly into the drum before washing. • Do not use it with the coloured items. Using starch • When using an oxygen-based bleach, select a programme which washes the laundry at • Add liquid starch, powder starch or the a low temperature. dyestuff into the softener compartment.
-
Page 12: Tips For Efficient Washing
4.2.7 Tips for efficient washing Clothes Light Colours and Black/Dark Delicates/ Colours Whites Colours Woollens/Silks (Recommended (Recommended (Recommended temperature (Recommended temperature temperature range temperature range range based on soiling level: range based on soiling level: based on soiling based on soiling 40-90 oC) cold-40 oC) level: cold -40 oC) -
Page 13: Operating The Product
4.3 Operating the product 1 - Programme Selection Knob (Uppermost position On / Off) 4.3.1 Control panel 2 - Display 3 - End Time Adjustment Button 4 - Programme Follow-up Indicator 5 - Start/Pause Button 6 - Auxiliary Function Button 3 7 - Auxiliary Function Button 2 8 - Auxiliary Function Button 1 9 - Spin Speed Adjustment Button... - Page 14 • : Selectable * : Automatically selected, cannot be cancelled. ***: Eco 40-60 with 40 °C temperature selection is the test programme in accordance with EN 60456:2016/A11:2020 and energy label with Commission Delegated Regulation (EU) 2019/2014 - : See the programme description for maximum load. INFORMATION •...
-
Page 15: Main Programmes
4.3.5 Main programmes Bebek+ ( Hygiene+) • Depending on the type of fabric, use the Applying a steam step at the beginning of the following main programmes. programme allows to soften the dirt easily. • Pamuklu (Cottons) Use this programme for your laundry (baby clothes, bed sheets, bedlinen, underwear, etc. - Page 16 Mix 40) • Karma ( CAUTION! You can use this programme to wash cottons and synthetics together without the need to sort them. • Do not use the washing machine to wash materials such as carpets, rugs etc. Otherwise, permanent •...
- Page 17 4.3.7 Special programmes Rinse hold If you are not going to unload your clothes For specific applications, select any of the immediately after the programme ends, you can use following programmes. rinse hold function to keep your laundry in the final •...
- Page 18 4.3.10.1 Auxiliary functions INFORMATION Ön Yıkama (Prewash) • • This is not a washing programme. A Prewash is only worthwhile for heavily soiled It is a maintenance programme. laundry. Not using the Prewash will save • Do not run this programme when there are energy, water, detergent and time.
- Page 19 Changing the delayed end time • AntiCrease+ If you want to change the time during countdown: If you press and hold the auxiliary function button Turn the programme selection knob to cancel the 3 for 3 seconds, this function will be selected delayed end time function, and then set the desired and the programme follow-up light of the relevant time again.
-
Page 20: Loading Door Lock
You can change the auxiliary functions, speed and temperature settings without stopping the programme flow while the programme is running. To do this, the change you are going to make must be something that will be carried out after the programme step that is running. If the change is not suitable, relevant lights will flash 3 times. -
Page 21: Cancelling The Programme
Changing the auxiliary function, speed and 4.3.17 End of programme temperature At the end of the programme, “End” will be displayed. Depending on the step the programme has reached, you can cancel or select auxiliary 1. Wait until the light of the loading door goes functions. -
Page 22: Maintenance And Cleaning
4.4 Maintenance and cleaning INFORMATION Service life of product extends and frequently • Foreign metal substances will cause experienced problems will be reduced if it is rust stains in the drum. Clean the cleaned at regular intervals. stains on the drum surface by using 4.4.1 Cleaning the detergent drawer cleaning agents for stainless steel. -
Page 23: Draining Remaining Water And Cleaning The Pump Filter
4.4.5 Draining remaining water 3 Follow the below procedures in order to drain water. and cleaning the pump filter The filter system in your machine prevents solid items such as buttons, coins and fabric The product does not have an emergency fibres clogging the pump impeller during water drain hose, in order to drain the water: discharge of washing water. -
Page 24: Troubleshooting
5 Troubleshooting • Loading door lock is activated because of the water level in the product. >>>Drain the water by running the Pump or Spin programme. Programmes do not start after the loading door is • Product is heating up the water or it is at the spinning cycle. closed. - Page 25 Washing performance is poor: Laundry turns gray. (**) Washing machine does not rinse well. • Insufficient amount of detergent has been used over a long • The amount, brand and storage conditions of the detergent period of time. >>>Use the recommended amount of used are inappropriate.
- Page 26 Too much foam forms inside the product. (**) WARNING • Improper detergents for the washing machine is used. >>>Use detergents appropriate for the washing machine. • If you cannot eliminate the problem • Excessive amount of detergent is used. >>>Use only although you follow the instructions in sufficient amount of detergent.