Miele G 5482 Operating Instructions Manual page 23

Setting the rinse-aid dosage
You can adjust the rinse-aid dosage for
best results.
The rinse-aid dosage can be set from 0
to 6 ml.
3 ml is the factory default setting.
The rinse-aid dosage can turn out to be
higher than the set value due to the au-
tomatic adjustment of the program.
If spots appear on dishes and glass-
ware:
- Increase the rinse-aid dosage.
If clouding or smearing appears on
dishes and glassware:
- Decrease the rinse-aid dosage.
Before using for the first time
 Open the door.
 Turn the dishwasher off with the
 button, if it is turned on.
 Press the  button in and, while
holding it in, turn the dishwasher on
using the  button.
Keep the  button pressed in for at
least 4 seconds until the  indicator
light comes on.
If this does not happen, start the proce-
dure from the beginning again.
 Press the Program button 3 times.
The top left program indicator light will
flash rapidly 3 times at intervals.
The set value will appear in the display
after .
  will start flashing in the time display.
Setting 3 is set.
 Use the  button to select the re-
quired setting.
The dosage amount increases each
time you press the button. When the
highest value is reached, the setting
starts again from the beginning.
The setting is now saved.
 Turn the dishwasher off with the
 button.
23