Table of Contents
Advertisement
Note
Do not set the Reader to data transfer mode while
downloading via a wireless connection.
Your computer must be turned on to charge the Reader.
The Reader will not be charged if your computer enters
sleep mode or standby mode. Keep your computer turned
on with a stable and continuous power supply while
charging the Reader.
The (Power) button cannot be used when the Reader is
connected to your computer and charging.
If you turn off the Reader by tapping [Settings]
Shutdown] while in charging mode, the Reader will stop
charging.
Tip
You can also charge the Reader using the AC Adapter
(PRSA-AC10/PRSA-AC1A, sold separately). This method of
charging will take approximately 2 hours to fully charge
the battery.
If the battery is depleted, charging the Reader with the AC
adapter for 3 minutes will provide enough battery power
to read up to approximately 600 pages.
To change from charge mode to data transfer mode, tap
the status bar to display the notification window
[USB connected]
Table of Contents
[Yes].
Battery
[Device
tap
35
Advertisement
Table of Contents
