Table of Contents
Advertisement
Help Guide
Interchangeable Lens Digital Camera
ILCE-7CR
α7CR
Wired LAN (USB-LAN)
Configures a wired LAN. You can connect this product to a network via wired LAN by connecting a commercially
available USB-LAN conversion adaptor to the USB Type-C terminal on the product.
MENU →
(Network) → [Wired LAN] → desired setting.
1
Menu item details
IP Address Setting:
Sets whether to configure the IP address for the wired LAN automatically or manually. ([Auto]/[Manual])
Display Wired LAN Info.:
Displays wired LAN information for this product such as the MAC address or IP address.
IP Address:
If you are entering the IP address manually, enter the fixed address.
Subnet Mask/Default Gateway/Primary DNS Server/Second DNS Server:
If you have set [
IP Address Setting] to [Manual], enter each address according to your network environment.
Hint
We recommend that you use a gigabit ethernet adaptor for USB Type-C connections.
To display the QR Code for the MAC address
You can import the MAC address of this camera to a smartphone. Use one of the following methods to display the QR Code on
the screen, and read the QR Code using the Transfer & Tagging smartphone application.
When the camera is turned off, turn the camera on while pressing the
Press the
(Delete) button on the [Display Wired LAN Info.] screen.
For details on how to read the QR Code using the Transfer & Tagging, refer to the following support page.
https://support.d-imaging.sony.co.jp/app/transfer/l/macaddress/index.php
The Transfer & Tagging is only available in certain countries and regions.
Note
Not all types of USB-LAN conversion adaptors are guaranteed to operate properly.
Related Topic
Keyboard screen
5-054-923-11(1) Copyright 2023 Sony Corporation
451
(Playback) button.
TP1001163761
- Quick Links:
- Customizing the Camera
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the a7CR and is the answer not in the manual?
Questions and answers
как очистить матрицу
To clean the sensor of the Sony a7CR:
1. Turn off the camera before cleaning.
2. Ensure the battery level is at least 51% before starting.
3. Set [Shutter When Pwr OFF] to [Off] under [Anti-dust Function] if cleaning with the camera off.
4. Do not use a spray-type blower, as it may introduce water droplets inside the camera.
5. Avoid inserting the blower tip beyond the lens mount area to prevent contact with the sensor.
6. Use a blower gently and avoid blowing too hard to prevent internal damage.
7. If dust remains after cleaning, consult a service facility.
8. The sensor may vibrate and make noise during cleaning, which is normal.
9. Automatic cleaning may occur when the camera is powered off.
This answer is automatically generated