Table of Contents
Advertisement
Help Guide
Interchangeable Lens Digital Camera
ILCE-7CR
α7CR
Bracket Settings
Sets self-timer shooting, the shooting order for the exposure bracket / white balance bracket, and the shooting method
for the focus bracket in the bracket shooting mode.
MENU →
(Shooting) → [Drive Mode] → [Bracket Settings] → desired setting.
1
Menu item details
Selftimer during Bracket:
Sets whether to use the self-timer during bracket shooting. Also sets the number of seconds until the shutter is released
if using the self-timer.
(Off/2 Sec/5 Sec/10 Sec)
Bracket order:
Sets the order of exposure bracketing and white balance bracketing.
(0→-→+/-→0→+)
Focus Bracket Order:
Sets the shooting order for the focus bracket. ([0→+]/[0→-→+])
Exposure Smoothing:
Sets whether to automatically adjust the exposure while shooting with the focus bracket. ([On]/[Off])
Shooting Interval:
Sets the shooting interval when shooting with the focus bracket. ([Shortest]/[1 Sec]/[2 Sec]/[3 Sec]/[5 Sec]/[10 Sec]/[15
sec]/[30 Sec])
Focus Brckt Saving Dest:
Sets the save destination folder for still images taken with the focus bracket. ([Current Folder]/[New Folder])
Note
When [0→-→+] is selected for [Focus Bracket Order], the number of shots taken with the focus bracket is fixed at three.
Related Topic
Cont. Bracket
Single Bracket
WB bracket
DRO Bracket
Focus Bracket
5-054-923-11(1) Copyright 2023 Sony Corporation
260
TP1001150836
- Quick Links:
- Customizing the Camera
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the a7CR and is the answer not in the manual?
Questions and answers
как очистить матрицу
To clean the sensor of the Sony a7CR:
1. Turn off the camera before cleaning.
2. Ensure the battery level is at least 51% before starting.
3. Set [Shutter When Pwr OFF] to [Off] under [Anti-dust Function] if cleaning with the camera off.
4. Do not use a spray-type blower, as it may introduce water droplets inside the camera.
5. Avoid inserting the blower tip beyond the lens mount area to prevent contact with the sensor.
6. Use a blower gently and avoid blowing too hard to prevent internal damage.
7. If dust remains after cleaning, consult a service facility.
8. The sensor may vibrate and make noise during cleaning, which is normal.
9. Automatic cleaning may occur when the camera is powered off.
This answer is automatically generated