Table of Contents
Advertisement
installation
3. Remove the middle hinge. Lift the lower door and place it on
a padded surface to prevent from being scratched.
4. Remove both levelling feet and bottom hinge.
• Do not lay the unit flat as this may damage the coolant system.
• During door reversal, when swapping the position of the bottom hinge or adjusting the
levelling feet, tilt the unit. Do not lay the unit flat.
5. Reverse the bottom hinge and re-adjust the position of the bottom hinge pin. Reverse the
upper hinge and re-adjust the position of the upper hinge pin. Tighten the pins securely.
Bottom hinge
Upper hinge
11
Advertisement
Table of Contents
