6.16.2.2 Using SR Suntour high-speed compression damping
A high speed is generated in the suspension fork,
e.g. on a mogul slope or during landing after a
jump.
Figure 166: High-speed movements
R2C2-PCS
R2C2
RC2
RC2-PCS
1
Table 67: High-speed lever (1) on the SR Suntour
suspension fork on the crown
MY23K0a - 52_1.0_02.09.2022
The settings on the high-speed damper control
the suspension behaviour of the fork during
•
stronger impacts
•
small, rapid impacts (e.g. stairs or mogul slopes)
•
landings after quick, successive jumps.
Turn
high-speed lever
clockwise gradually.
The high-speed compression damper is placed
in a harder setting.
Turn
high-speed lever
anticlockwise gradually.
The high-speed compression damper is placed
in a softer setting.
Operation
(1) on the crown
(1) on the crown
169