Releasing The Mobile; Suspension Fork Coil Spring; Bar Ends; Fixed Weather Protection Systems - Bosch KB069 RW Series Translation Of Original Operating Instructions

6.6.6.2 Releasing the mobile

1 Turn the mobile 90° to the left
 The fastener is released.
2 Remove mobile
6.6.7

Suspension fork coil spring

If the desired suspension fork sag cannot be
achieved after adjustment, the coil spring
assembly must be replaced with a softer or harder
spring.
 Fit a softer coil spring assembly group to
increase the sag.
 Fit a harder coil spring assembly group to
decrease the sag.
6.6.8

Bar ends

Handlebar ends are permissible provided they
§
are professionally fitted to face the front at a
specialist shop and only if they are approved for
use on e-bikes. They must not seriously alter
load distribution.
6.6.9

Fixed weather protection systems

Fixed weather protection systems are only
§
permitted with the vehicle manufacturer's
approval.

6.6.10 Additional battery headlight

Fitting additional battery headlights is permitted
§
provided they comply with the laws of the country
where the pedelec will be ridden and if they are
approved for use on e-bikes.
MY23K0a - 52_1.0_02.09.2022

6.6.11 Kickstand

Kickstands are permitted if they are able to bear
§
the weight of the pedelec.
We recommend a parking stand into which either
the front wheel or rear wheel can be inserted
securely for pedelecs which do not have a
kickstand.
Description
Parking stand
universal stand
TWO-LEG STAND ADAPTER
FOR QUADRIGA 750 SERIES
Table 63: Accessories
Operation
Article number
XX-TWO14B
08959-510
161