Serial Cable N8117-09; Installation - NEC EXP805 User Manual
Hide thumbs
Also See for EXP805:
- Maintenance manual (136 pages) ,
- User manual (262 pages) ,
- Maintenance manual (138 pages)
Table of Contents
Advertisement
Chapter 2 Preparations
1.31
Serial cable N8117-09
A serial connector can be attached to this device.
If a tertiary riser card is attached, a serial connector can be attached by using Slot 6.
Installation
Please prepare the following before installing the options.
Parts included in the option kit
T-10 hexalobular driver
To install the components, follow these steps.
1.
See steps 1 to 6 in Chapter 2 (1.2 Overview of Installation and Removal) for preparations.
2.
Pull the serial cable blank cover forward to remove it.
A)
If a tertiary riser is not attached
Note
In order to prevent the damage to electronic components, please start to install the
system after conducting the appropriate anti-static treatment. There is a possibility
of causing electrostatic discharge if appropriate grounding wire treatment is not
conducted.
Express5800/R120h-2M (2nd-Gen) User's Guide
1. Installing Internal Optional Devices
179
Advertisement
Table of Contents
