4X 3.5-Inch Mid-Plane Drive Cage N8154-100; Installation - NEC EXP805 User Manual

Chapter 2 Preparations
1.29

4x 3.5-inch Mid-plane Drive Cage N8154-100

The server can be added with a 4x 3.5-inch mid drive cage in its inside. When installing a mid drive cage, all
equipped possible drive cages have to be installed in the front bay and the rear bay.

Installation

Please prepare the following before installing the options.

Parts included in the option kit
The option must be attached under the following conditions.

A 1U heat sink is required to attach this option. Attach the 1U heat sink before attaching the mid-plane drive
cage.

If you would like to attach a TPM, attach the TPM before attaching the mid-plane drive cage.

If you would like to attach a Type-a (mezzanine type AROC) RAID controller, attach the controller before
attaching the mid-plane drive cage.
To install the components, follow these steps.
1. See steps 1 to 7 in Chapter 2 (1.2 Overview of Installation and Removal) for preparations.
Express5800/R120h-2M (2nd-Gen) User's Guide
1. Installing Internal Optional Devices
171