Activity Tracking; Lock Function (Premium Function); System Message - Bosch KB060 KD Series Manual

All manuals and user guides at all-guides.com
Overview

3.4.2.10 Activity tracking

User recognition is required on a PC or
smartphone to record activities.
The rider needs to agree to location data being
saved on the portal or the app to record activities.
Only then will all activities be displayed on the
portal or app.
Your location will only be logged if the on-board
computer is connected to the eBike Connect app.
Activities will be displayed after synchronisation in
the app and on the portal.

3.4.2.11 Lock function (premium function)

When the lock function is used, the on-board
computer acts in a similar way to a key for the
drive system. Once the lock function is switched
on, the e-bike drive unit assistance is deactivated
by removing the on-board computer. The rider can
continue to use the mechanical drive system.
It can then only be activated using the on-board
computer belonging to the pedelec. The lock
function is linked to the eBike Connect app user
account.
The lock function is not anti-theft protection; it is
more a supplement to a mechanical lock. The lock
function does not provide mechanical blocking of
the pedelec or similar. It only deactivates
assistance from the drive unit.
If third parties are to have temporary or permanent
access to the pedelec, the lock function must be
deactivated in the eBike Connect app.
When activating and deactivating the lock
function, the drive system emits audible lock
signals. The audible feedback signal is activated
by default. The feedback signal can be
deactivated under SETTINGS <My eBike>.

3.4.2.12 System message

The drive system monitors itself continuously and
if an error is detected, it is indicated by a system
message. The system may switch off
automatically depending on the type of error.
You will find more information and a table
containing all system messages in Section 6.2.
58
MY22K01 - 32_1.0_26.08.2021