Epson OT-CH60II User Manual page 7

Hide thumbs Also See for OT-CH60II:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
4.
Insert the power plug into the power outlet, and switch on the power supply.
The
LED (orange) on the left of battery holder to which the battery pack is
attached comes on and charging starts.
5.
The Charge LED (orange) goes off when charging has been completed.
Note:
Turn ON/OFF the charger only when the power plug of the AC adapter is connected
with the power outlet.
When you switch off the charger and then switch it on again, check that
the
(Power) LED has gone off before you switch it on.
Remove the battery pack from the battery holders prior to leaving battery charger
unused for an extended period.
Notes on Charging Time
Charging time will be Approx. 2.5 hours. This is the time taken to charge a
battery pack that is completely discharged.
Actual charging time may differ from the time above, depending on the
temperature and the condition of the battery pack.
Cleaning the charger Case
Be sure to turn off the charger, and wipe the dirt off the charger case with a dry
cloth or a damp cloth.
CAUTION:
Never clean the product with alcohol, benzine, thinner, or other such solvents.
Doing so may damage or break the parts made of plastic and rubber.
(Power) LED (green) comes on. After a few seconds, the Charge
ON
7

Advertisement

Table of Contents
loading

Table of Contents