Inspection And Maintenance - Bosch JLR-100-069 Original Instructions Manual

en-gb | 27 | JLR-100-069

5 Inspection and Maintenance

NOTICE
Modifications to this product which have not been
expressly approved by the manufacturer will void any
warranty. The manufacturer assumes no liability for
personal injuries or damage to materials which occur
as the result of improper use of this product.
Maintenance Work
Inspecting the Scissors Lift Table
for Visible Damage
Inspecting the Connections
between the Pump and Hydraulic
Cylinders
Inspecting the Functionality of the
Mechanical Lock
Cleaning the Protective Bellows
Cleaning the Scissors Lift Table
Inspecting the Hose for Leaks
Lubricating the Joints
Inspecting the Hydraulic Cylinders
for Leaks
Inspecting the Functionality of the
Pump
Draining, Flushing, and Refilling the
Pump Reservoir
One cycle means that the platforms have been
completely raised and lowered once.
SP04006297 | 06/2021
Only the maintenance work specified in these
instructions may be performed on the scissors lift table.
Only the replacement parts specified in these
instructions may be replaced on the scissors lift table.
No further service work may be performed on the
scissors lift table.
If damaged or in poor condition, take the scissors lift
table out of operation immediately and call the service
hotline.
Service Hotline
Russian Federation: 8 800 100 9791
Ukraine: 0 800 500 303
All Other European Countries: +49 32 221852372
Interval
Before each use
Once a Week
Once a Week
When necessary
Every 300 cycles or 6 months,
whichever comes first
Every 300 cycles or 6 months,
whichever comes first
Every 300 cycles or 6 months,
whichever comes first
Every 300 cycles or 6 months,
whichever comes first
Every 3000 cycles or 24 months,
whichever comes first
Every 3000 cycles or 24 months,
whichever comes first
Section
5.2
5.3
5.4
5.5
5.6
5.7
5.8
5.9
5.10
5.11
Bosch Automotive Service Solutions GmbH
Am Dörrenhof 1
85131 Pollenfeld-Preith
Germany