Wireless Remote Controller - Beko 71261 AL Owner's Manual

Wireless remote controller

Signal Transmitter
Hijyen/Ion
As the control temperature
sensor detects temperatures
in a wide range, the ambient
temperature displayed on the
controller can be misleading.
Control Display
Panel Screen
LCD
Display
Control
Panel
Hijyen/Ion
Rapid Cooling/Heating Function: Increases/Decreases
the indoor temperature in a short time.
Soft Air:
Energy Control Cooling Function: Activates the energy-
saving mode. This mode consists of three steps.
%
Silent function: Decreases the outdoor unit volume.
Indoor Fan Speed
Temperature Adjustment: Regulates the room
e t m e p a r u t e r d i r u g n
Celcius Switch: Pressing the "Sleep" and "Timer" buttons
at the same time for 10 seconds will enable the switch.
On/Off: Switches On/Off the A/C.
Cooling Mode: Cools the environment.
Auto-operation Mode: Heats or cools according to the
set temperature.
Dehumidifying mode: Removes the humidity in the
environment.
Fan Mode: Provides air circulation in the environment.
Heating Mode: Heats the environment.
Hygiene: It kills 99.99% of Escherichia Coli, Staphilococ-
cus Aureus microorganisms, and 99.99% of Bovine
isms on the indoor unit heat exchanger surface when
operated for 15 minutes at a temperature of 56ºC and
above in the hygiene function.
Ion: It removes microscopic particles in the environment
by giving ions to the environment. It removes bad odors.
Sleep Function: Prevents your room from cooling
down or warming up extremely during sleep.
Turns on the air conditioner at the set time.
Timer On:
Timer Off: Turns off the air conditioner at the set time.
Timer Cancel: Cancels all time settings.
Switches the display on the air conditioner on/off when the
"Sleep" button ( ) is pressed and held for 3 seconds.
Enters the clock setting section of the controller when the
"Timer" button (
Ambient Temperature is displayed on the controller display when
Description
Adjustment: It adjusts the fan speed.
o c i l o g n a d n e h i t a g n F . h a e r
) is pressed and held for 3 seconds.
h n t i e
-