Troubleshooting - Beko 71261 AL Owner's Manual

Recommendations for the solutions of the problems
Recommendations for the solutions of the problems
Blown fuse or circuit breaker. >>> Check for a blown fuse or inspect the circuit
breaker.
Timer may be set incorrectly. >>> Check whether you have made a mistake while
setting the timer.
Air conditioner does not cool or heat efficiently.
Filter may be dirty. >>> Check if the filter is dirty.
The proper temperature may not be selected. >>> Check if the temperature setting is
performed correctly.
Room may be very hot when you operate the A/C for the first time. >>> Wait a little for
cooling if the room is very hot when you operate the A/C for the first time.
Air intake to the unit from the outside may be blocked >>>> Check for any obstacle in
There is a strange smell in the room.
Objects in the room may cause bad odour>>> Check if the odour is caused by the
humidity on the walls, rugs, furniture and clothes inside the room.
The A/C runs loudly.
It is not a malfunction if it sounds as if water is flowing. That is the sound of refrigerant
liquid circulating inside the A/C.
It is not a malfunction if it sounds like compressed air is being released.. It is the noise
that occurs when the refrigerant moves to opposite directions during the heating
operation inside the unit at the beginning and end of the defrosting process.
The air conditioner blows mist.
If the environment is too humid, condensation will form when the air flow from the air
conditioner cools the hot air. This is not a malfunction of the air conditioner and is not a
failure.
The air conditioner does not start for 3 minutes when it is turned on again.
This is a measure developed for the protection of the air conditioner. The AC will restart T
after 3 minutes.
The display of the remote control can barely be seen or can not seen at all.
The batteries may be depleted or incorrectly inserted. >>> Check the batteries.
When the air conditioner is turned on or off, sounds like "tick" "tick" come from the indoor unit.
T The temperature change causes the plastic body to shrink or expand. This is not a
malfunction of the air conditioner and is not a failure.
The airflow does not start directly while heating is in progress.
If the air flow starts before the temperature rises, an undesirable cooling effect will
occur. To prevent this, the air flow will start after the temperature has reached a
sufficiently high temperature. This is not a malfunction of the air conditioner and is not a
failure.
If the problem persists after following the instructions in this section, contact your
vendor or an Authorized Service. Never try to repair your product yourself.
30