3.4
Reset communication module to factory settings
There are two ways to reset to factory settings:
• PROFINET factory reset
• SIMATIC S7-PCT Factory Reset
PROFINET factory reset
You can find additional information on the PROFINET factory reset in the ET 200eco PN M12-L
distributed I/O system (http://support.automation.siemens.com/WW/view/en/109774008)
system manual.
SIMATIC S7-PCT Factory Reset
You trigger the reset to the factory settings in SIMATIC S7-PCT tool.
A reset is performed completely by IO-Link application and affects IO-Link related data.
• The port modes remain in the currently used mode
• Non-volatile memory is reset (content of the IO-Link data memory is lost)
CM 8x IO-Link + DIQ 8x24VDC M12-L 8xM12 (6ES7148-6JJ00-0BB0) communications module
Equipment Manual, 12/2022, A5E51718265-AB
3.4 Reset communication module to factory settings
Product overview
21