Advertisement
Quick Links
IMPORTANT SAFETY INSTRUCTIONS
WARNING
If the instructions contained in this manual are not followed
precisely, a fire or explosion may result causing property
damage, personal injury or loss of life.
Do not store or use gasoline or other flammable vapors, liquids
or materials near this or any other appliance.
- WHAT TO DO IF YOU SMELL GAS
• Do not try to light any appliance.
• Do not touch any electrical switch.
• Do not use any telephones in your building.
• Immediately call your gas supplier from a neighbor's phone.
Follow the gas supplier's instructions.
• If you cannot reach your gas supplier, call the fire
department.
- Installation and service must be performed by a qualified
installer, service company or gas supplier.
INSTALLATION AND SERVICE MUST BE PERFORMED BY A
QUALIFIED INSTALLER.
IMPORTANT: SAVE FOR THE LOCAL INSPECTOR'S USE.
Table of Contents
12
12
15
17
18
21
29
32
3
Advertisement
Related Manuals for Smeg SPR30UGGX
Summary of Contents for Smeg SPR30UGGX
-
Page 1: Table Of Contents
Table of Contents 1 Installation 1.1 Product dimensions 1.2 Unpacking, moving and positioning the range 1.3 Electrical connection 1.4 Gas connection 1.5 Conversion to propane gas (LPG) 1.6 Wall and floor attachment 1.7 For the installer IMPORTANT SAFETY INSTRUCTIONS WARNING If the instructions contained in this manual are not followed precisely, a fire or explosion may result causing property damage, personal injury or loss of life. - Page 2 Important Safety Instructions Important Notes to the Installer TIP OVER HAZARD • Read all instructions contained in these installation instructions WARNING: Tip Over Hazard before installing the range. • Remove all packing material from • A child or adult the oven and the drawer could tip the compartments before connecting range over and...
- Page 3 Important Safety Instructions • Check for proper installation and • The unit is heavy and requires at use of the anti-tip bracket. least two persons or proper Carefully tip the range forward equipment to move it. by pulling it from the back to •...
- Page 4 Important Safety Instructions • The appliance must be electrically grounded in accordance with local codes or, in the absence of WARNING local codes, with the National Electrical Code, NFPA 70 latest Never leave children alone or edition or, in Canada, the unattended in the area where an Canadian Electric Code, CSA appliance is in use.
- Page 5 Important Safety Instructions • Do not store or use gasoline or other flammable vapors and liquids near this or any other WARNING appliance. Explosions or fires could result. Do not repair, replace or remove any • Adjust the size of the surface part of the appliance unless specifically burner flame so it does not extend recommended in the manuals.
- Page 6 Important Safety Instructions • Before installing, turn power OFF Gas safety at the service panel. Lock service panel to prevent power from WARNING being turned ON accidentally. • For appliances equipped with a Burning gas cooking fuel generates some cord and plug, do not cut or by-products which are on the list of remove the ground prong.
- Page 7 Important Safety Instructions • The minimum supply pressure must Propane Gas Installation be 1" water column above the • The propane gas tank must be manifold pressure printed on the equipped with its own high rating label. The maximum supply pressure regulator.
- Page 8 Important Safety Instructions Related Equipment Safety • When installing a cooktop over a single oven, be sure to follow • The appliance should only be both the oven and cooktop used if installed by a qualified installation manuals. technician in accordance with these installation instructions and Ventilation Recommendations all applicable regulations and...
- Page 9 Important Safety Instructions CAUTION WARNING The appliance should not be installed If the information in this manual is not with a ventilation system that blows air followed exactly, fire or shock may result downward toward the burners. This type causing property damage or personal of ventilation system may cause ignition injury.
-
Page 10: Installation
Installation 1 Installation 1.1 Product dimensions Overall dimensions: Location of gas and electrical connection points. 760 mm " 25” 630 mm 1153 mm " 134,4 mm " 851 mm " 30 mm " Measurement M varies according to the model: the minimum is obtained without the 42,6 mm "... - Page 11 Installation Cabinet clearances min. clearance from the sides of range to side wall or other combustible material; min. cabinet opening width; upper cabinet to countertop; max. upper cabinet depth. The side cabinet depth (clearance B) must match the front edge of the range side panel.
- Page 12 Installation Location of the gas and electric Island installation outlets If the appliance is installed as an island: 1. Unscrew the screws shown. 2. Remove the spacers (A). 3. Replace the screws that were previously removed. min. 150 mm min. 5 “...
-
Page 13: Unpacking, Moving And Positioning The Range
Installation The side cabinet depth (clearance B) must • Due to its weight, a dolly/fork lift with match the front edge of the range side soft rubber tread wheels should be used panel. to move this unit. The weight must be supported uniformly across the bottom. - Page 14 Installation Assembling the backguard The backguard provided is an integral part of the product; it must be fastened to the appliance prior to installation. The backguard must always be positioned and secured correctly on the appliance. 1. Assembling the backguard. You can find the assembly instructions for the backguard in the instructions sheet provided.
-
Page 15: Electrical Connection
Installation and spacers provided that are necessary for the slot-in installation. WARNING Electrical shock hazard • Disconnect the electrical supply before servicing the appliance • It is the personal responsibility of the consumer to have the appropriate outlet or junction box with the correct, properly grounded wall receptacle installed by a qualified electrician. -
Page 16: Gas Connection
Installation These ID plates must never be removed. 1.4 Gas connection WARNING: Explosion hazard • Use a new AGA or CSA-certified connector. • Install a manual shut-off valve. • Securely tighten all gas connections. • If connected to propane, have a qualified technician ensure that the gas pressure does not exceed a 14"... - Page 17 Installation To convert the appliance to propane gas see "Conversion to propane gas (LPG)". The conversion must be done by a qualified CAUTION technician or installer. Use a flexible gas pipe with a length of at least 5 ft (1.5 m). The gas inlet to the unit is located at the Do not allow regulator to rotate on pipe when tightening fittings.
- Page 18 Installation 4. Retest for leaks. If no bubbles appear, • Dual Flame burner: the test is passed. Wipe off all residues of detection fluid. Testing the electric ignition of the burner This test should be performed after the range and supply line connectors have been carefully checked for leaks and the range connected to the electric power supply:...
-
Page 19: Conversion To Propane Gas (Lpg)
Installation 1.5 Conversion to propane gas (LPG) This appliance is shipped from the factory for use with natural gas. Use this kit to convert the appliance for use with propane WARNING gas, if necessary. Comply with the following: Ensure that the range is converted for use with the appropriate gas This conversion kit shall be installed by a qualified service agency in accordance... - Page 20 Installation List of components This conversion kit consists of the following CAUTION components: Before proceeding with the gas conversion, the gas supply must be turned off before disconnecting the electrical power. Setting the pressure regulator for propane gas To convert the regulator to the type of gas used, the following must be done: 1.
- Page 21 Installation Rapid burner One change injectors warning label Unscrew the burner nozzles with a 7 mm socket wrench and replace them according to the type of gas to be used and the description in section ”Burner and nozzle characteristics tables”. •...
- Page 22 Installation 5. Loosen the screws A and remove the burner fixing plate. 3. Refit the burner components correctly. 6. Loosen the screws B. 7. Move away the lock that secures the Replacing the oven burner nozzle thermocouple and igniter to the burner. 1.
- Page 23 Installation Check the appearance of the flames 5. Replace the nozzle using a 7mm socket wrench. • Yellow flames: Further adjustment is required. The tightening torque of the nozzle • Yellow tips on outer cones: Normal for must be 4 Nm. propane gas.
- Page 24 Installation Burner and nozzle characteristics tables To adjust the range for propane gas or to return to using Natural Gas, refer to the charts below. Natural Gas DUAL int DUAL ext Oven Broiler QT (BTU) 10000 12000 18000 17000 9000 Injector Ø...
- Page 25 Installation • Connect the gas supply line to the unit 4. Retest for leaks by turning the gas supply pressure regulator using a 1/2” flex gas line shutoff valve on. When the leak line connector between the manual shut- check has been completed (no bubbles off valve and the pressure regulator.
- Page 26 Installation • Save the nozzles removed from the unit Conversion to natural gas along with these instructions for possible This appliance is shipped from the factory future use. for use with natural gas. If the appliance • For installation of the appliance at high was previously converted to propane gas, altitude, please consult your local gas you have to convert it back to natural gas.
-
Page 27: Wall And Floor Attachment
Installation 1.6 Wall and floor attachment WARNING: Tip Over Hazard WARNING • A child or adult Electrical shock hazard could tip the •Use extreme caution range over and when drilling holes in the be killed. wall or floor. There may be concealed electrical •... - Page 28 Installation Installing the anti-tip bracket NOTE: The wall attachment is 1. Ensure that the electrical connection is in recommended if the appliance is the correct position. placed against a wall. Floor 2. Assemble the bracket. attachment is recommended in case of island installation. 5.
- Page 29 Installation 7. Use the following distances for the distance from the side of the appliance WARNING to the bracket holes. The rear vent trim has ” (5 mm) standoffs to keep the appliance slightly away from the back wall. Do not remove or tamper with standoffs due to potential temperature issues.
-
Page 30: For The Installer
Installation Door removal 1.7 For the installer • The plug must remain accessible after the It is not necessary to remove the door in installation is complete. Do not kink or order to install the range, but is an added trap the mains connection cable.
Need help?
Do you have a question about the SPR30UGGX and is the answer not in the manual?
Questions and answers