Honda CR-V 2022 Owner's Manual page 78

Hide thumbs Also See for CR-V 2022:
Table of Contents

Advertisement

uuChild SafetyuSafety of Infants and Small Children
Adding Security with a Tether
Anchor Fitting
Tether Anchor Points
Anchor
Tether Strap
Hook
76
A tether anchor point is provided behind each
rear seating position.
If you have a child seat that comes with a
tether but can be installed with a seat belt, the
tether may be used for additional security.
Using an outer anchor
Tether
1. Put the head restraint to its upper-most
Strap
position, then route the tether strap
Hook
through the head restraint legs.
Make sure the strap is not twisted.
2. Secure the tether strap hook to the anchor.
3. Tighten the tether strap as instructed by the
child seat manufacturer.
Using the center anchor
Anchor
1. Put the head restraint to its upper-most
position.
2. Open the anchor cover.
3. Route the tether strap through the head
restraint legs.
Make sure the strap is not twisted.
4. Secure the tether strap hook to the anchor.
1Adding Security with a Tether
Always use a tether for forward facing child seats
whether using the seat belt or lower anchors.

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the CR-V 2022 and is the answer not in the manual?

Questions and answers

Bernie King
January 31, 2025

Why is my key fob not working working at all after replacing the battery 3 times but works if I hold it next to the Start button

1 comments:
Mr. Anderson
February 10, 2025

The key fob for your 2022 Honda CR-V may not be working properly after multiple battery replacements due to one of the following reasons:

1. Battery Installation Issue – Ensure the CR1620 battery is correctly installed with the proper orientation.
2. Faulty or Low-Quality Batteries – If the batteries used are not of good quality or are not providing sufficient power, the key fob may not function properly.
3. Key Fob Malfunction – The key fob itself could be damaged or malfunctioning, preventing normal operation.
4. Signal Interference or Weak Transmission – Holding the key fob near the Start button suggests that the signal may be weak, which could be due to internal issues with the transmitter.
5. Reprogramming Needed – The key fob may need to be reprogrammed by a dealer if it is not properly communicating with the vehicle.
6. Vehicle Receiver Issue – If the vehicle’s keyless entry system is malfunctioning, it may not be recognizing the key fob properly.

If the issue persists, it is recommended to have the key fob and the vehicle's keyless entry system checked by a dealer.

This answer is automatically generated

Bernie King
January 31, 2025

Why is my key fob to my 2022 Honda CR-V not working until I hold it almost on the Start button ?

1 comments:
Mr. Anderson
February 10, 2025

The key fob for your 2022 Honda CR-V only works when held close to the Start button because the keyless remote battery is weak. When the battery is low, the vehicle may not detect the remote from a distance. To start the engine, touch the center of the ENGINE START/STOP button with the H logo on the keyless remote while the button is flashing, then press the button within 10 seconds after the beeper sounds.

This answer is automatically generated

Wayne Worley
March 6, 2025

Spare tire location, 2022 Honda CRV

1 comments:
Mr. Anderson
March 6, 2025

The spare tire in the 2022 Honda CR-V is located in the spare tire area under the trunk floor.

This answer is automatically generated

Table of Contents

Save PDF