4. Select programme settings
Select the degree of soiling
Lightly soiled
No visible dirt or stains. Possibly slight
body odour.
Normally soiled
Visibly dirty and/or just a few slight
stains.
Heavily soiled
Soiling and/or stains clearly visible.
The following will appear in the display:
Normal
Select the degree of soiling with the
or sensor and confirm with OK.
The dosage display will now appear.
The following parameters will change
depending on the degree of soiling se-
lected:
– detergent dosage
– rinse water level
– with light soiling the programme dur-
ation will be reduced
– with heavy soiling, a pre-wash will be
carried out automatically with some
programmes.
Tip: You can alter the default setting for
the degree of soiling or switch off the
degree of soiling query in Settings (see
"Settings - Degree of soiling").
Confirm the detergent dosage dis-
play
The following will appear in the display:
Dosage
Confirm with OK.
The dosage will not be displayed if
TwinDos or CapDosing have been se-
lected.
Tip: The value given in the detergent
dosage display should be observed if
you are dispensing detergent via the
detergent dispenser drawer.
WASHING
100%
27