Table of Contents
Advertisement
Before installation
Before installation, it is important
to read the information contained in
this chapter and in the "IMPORTANT
SAFETY INSTRUCTIONS" chapter.
Installation materials
1 non-return flap
for installation in the exhaust vent on
the motor (not needed for recirculation
mode)
Cover foil
for sealing the housing
Wall bracket
for securing the ventilation hood on the
wall.
5 screws 5 x 60 mm and
5 plugs 8 x 50 mm
3 washers 6.4 mm
for attaching to the wall
The screws and plugs are
designed for use in solid walls only.
Use different fasteners for other wall
construction types.
Make sure that the wall can support
the load.
Installation plan
See the installation plan for details of
the individual steps involved in the
installation of this appliance.
Installation
39
Advertisement
Table of Contents
