Operation (Automatic Mode); Cooking With Con@Ctivity (Automatic Mode); Cooking Process - Miele DA6498WGG Operating And Installation Instructions

Table of Contents

Advertisement

When Con@ctivity is active, the
ventilation hood always operates in
automatic mode (see "Before using for
the first time – Setting up
Con@ctivity").
If you wish to operate the ventilation
hood manually; see "Operation
(Manual mode) – Cooking without
Con@ctivity".
Cooking with Con@ctivity
(Automatic mode)
 Turn on a burner to the desired power
setting.
The overhead lighting will come on.
After a few seconds, the blower will
come on, briefly operating at power
level 2 before immediately switching to
level 1.
The ventilation hood selects the power
level automatically during cooking.
This level is determined by the total
output of the cooktop, i.e., the number
of burners in operation and the power
levels selected.
If you select a higher power level on the
cooktop or switch on multiple burners,
the ventilation hood will switch to a
higher blower level.
If you select a lower power level on the
cooktop or turn off a burner, the
ventilation hood will accordingly switch
to a lower blower level.

Operation (Automatic mode)

Examples for power levels 1 to B
Reaction time
Changing the power setting on the
cooktop does not lead to an immediate
increase or decrease in cooking vapors.
For this reason, the hood reacts with a
slight delay.
Delays can also result from the fact that
the cooktop transmits the information to
the hood in intervals.
The reaction time can vary from a few
seconds to a couple of minutes.

Cooking process

 For example, you switch on a burner
at the highest power level to heat
cookware for frying. After approx.
10 seconds to 4 minutes, you then
reduce the power level (60 seconds
to 5 minutes for a HiLight cooktop).
The ventilation hood recognizes a
cooking process.
The ventilation hood turns itself on and
when the cooktop power level has been
reduced, the ventilation hood switches
to power level 3 and remains at that
level for approx. 5 minutes.
After this, the blower level is once again
determined by the Con@ctivity function.
You can also manually select a different
blower level before then.
27

Advertisement

Table of Contents
loading

This manual is also suitable for:

Da 6498 w

Table of Contents