Dell SCv2080 Owner's Manual page 15

SCv2080 Storage Controller with SAS Front-End Ports
Features and indictors on a storage controller with SAS front-end ports.
Figure 7. SCv2080 Storage Controller with Four 12 Gb SAS Front-End Ports
Item Control/Feature
1 Battery status indicator
2 Battery fault indicator
3 MGMT port
4 REPL port
5 SAS activity indicators
6 Storage controller
module status
7 Recessed power off
button
8 Storage controller
module fault
About the SCv2080 Storage System
Icon Description
• Blinking green (on 0.5 sec. / off 1.5 sec.): Battery heartbeat
• Fast blinking green (on 0.5 sec. / off 0.5 sec.): Battery is
charging
• Steady green: Battery is ready
• Off: No faults
• Blinking amber: Correctable fault detected
• Steady amber: Uncorrectable fault detected; replace battery
— 10 Mbps, 100 Mbps, or 1 Gbps Ethernet port used for storage
system management and access to the BMC
NOTE: To use the MGMT port as an iSCSI port for
replication to another Storage Center, a Flex Port license
and replication license are required. To use the MGMT port
as a front-end connection to host servers, a Flex Port
license is required.
— 10 Mbps, 100 Mbps, or 1 Gbps Ethernet/iSCSI port used for
replication to another Storage Center
NOTE: To use the RELP port as a front-end connection to
host servers, a Flex Port license is required.
— • Off: Port is off
• Steady green: Port is on, but without activity
• Blinking green: Port is on and there is activity
On: Storage controller completed POST
Powers down the storage controller if held for more than five
seconds
• Off: No faults
• Steady amber: Firmware has detected an error
• Blinking amber:Storage controller is performing POST
Get other manuals https://www.bkmanuals.com
15