Table of Contents
Advertisement
Program color allocation
You can assign a color to a Favorite
program. In the list of Favorites, each
Favorite program is given a colored
frame, which can be adjusted.
Factory default: On
Hygiene
The
Maintenance Wash Hygiene
gram is shown in the list of special
programs.
If a program at a temperature below
140°F (60°C) has been used, a request
to start the
Maintenance Wash Hygiene
program appears in the display.
Factory default: Off
Expert code
A code has to be entered to cancel a
disinfection program. The code can be
modified.
The code is: 0 0 0
Make a note of your new code if you
ever change it.
Process technology
Anti-crease
The Anti-crease function helps prevent
creasing after the end of the program.
At the end of the program, the drum
continues to turn for up to 30 minutes.
The door can be opened at any time
during the Anti-crease phase.
pro-
Factory default: On
Water level Min. iron
You can increase the water level for
the main wash in the Minimum
iron program.
- + 0 mm wc (factory default)
- + 10 mm wc
- + 20 mm wc
- + 30 mm wc
Water level Cottons
You can increase the water level for
the main wash in the Cottons pro-
gram.
- + 0 mm wc (factory default)
- + 10 mm wc
- + 20 mm wc
- + 30 mm wc
Supervisor level
91
Advertisement
Table of Contents
