Low Water Pressure; Capdosing - Miele PWM 908 EL DP Operating And Installation Instructions

Supervisor level
Only cold water is used for the main
wash.
- Hot
Hot water is also added for the main
wash.
Hot water can only be added if the
wash temperature is above 86°F
(30°C).
Program cycle times will be longer if the
machine is not connected for hot water;
this may mean that the "Time left" dis-
play is incorrect.
First rinse
You can select the water type for the
first rinse in some programs.
- Cold (factory default)
Only cold water is used for the first
rinse.
- Hot
Hot water is also added for the first
rinse.
Final rinse
You can select the water type for the
last rinse in some programs.
- Cold (factory default)
Only cold water is used for the final
rinse.
- Hot
Hot water is also added for the final
rinse (only possible for programs with
a temperature of at least
140°F/60°C).
100

Low water pressure

If the water pressure is below 100 kPa
(1 bar), the program will be canceled
and the fault message
take will appear.
If the on-site water pressure cannot be
increased, activating the setting
ter pressure will prevent the program
from being canceled.
Factory default: No

CapDosing

You can choose whether
displayed in the program settings.
Factory default: On
Check water in-
Low wa-
is
CapDosing