Fujitsu D2509 Technical Manual page 19

Features
The following interrupt signals are used in the system:
Slot/device
VGA
LAN
Slot 7
Slot 6
Slot 5
Slot 4
Slot 3
Slot 2
Slot 1
Assignment of the PCI interrupts
If you select Auto in the BIOS setup, the interrupts are assigned automatically
and no further settings are required.
D2509 (TX200 S4)
Property
iRMC graphic
BCM5708c Single Channel PCI-INTB
PCIe x8
PCIe x8
PCI-X (133 MHz)
PCI-X (133 MHz)
PCI (33 MHz)
PCIe x8
PCIe x8
Technical Manual
Interrupt signal
PCI-INTA
PCI_INTA, PCI_INTB,
PCI_INTC, PCI_INTD
PCI_INTA, PCI_INTB,
PCI_INTC, PCI_INTD
PCI-X-INTC, PCI-X-INTD,
PCI-X-INTA, PCI-X-INTB
PCI-X-INTA, PCI-X-INTB,
PCI-X-INTC, PCI-X-INTD
PCI-INTC, PCI-INTD,
PCI-INTA, PCI-INTB
PCI_INTA, PCI_INTB,
PCI_INTC, PCI_INTD
PCI_INTA, PCI_INTB,
PCI_INTC, PCI_INTD
PCI slots
19