Related Manuals for Vector Fog DC20P
Summary of Contents for Vector Fog DC20P
- Page 1 DC20+ ULV FOGGER User Manual © 2019 Vectorfog is a trademark of Vectornate USA. All right reserved...
-
Page 2: Safety Precautions
www.vectorfog.com SAFETY PRECAUTIONS The battery charger is for AC 110V — 240V power supply/60Hz. Unplug the charger after the battery is fully charged (green light). Do not use any damaged power cord, plug, charger or socket. Do not touch the plug, charger or switch with wet hands. The charger is not waterproof. -
Page 3: Special Features
www.vectorfog.com PRODUCT OVERVIEW DC20 PLUS is a cordless motor operated machine that generates cold fog, mist or aerosol formed of tiny droplets known as ultra low volume (ULV). This machine is generally used to apply disinfectants, insecticides, deodorizers, biocides and fungicides. Due to the droplet size produced by this machine (5-50 microns), it is ideal for removing germs, insects, fungi and odors as the cold fog will penetrate each and every hidden corner of the fogged area. -
Page 4: Operation
www.vectorfog.com OPERATION CHARGING • All new machines only come with 30% battery life. • The battery needs to be fully charged • Unplug the charger when fully charged. • When the battery is under 30%, the indicator on the handle turns red. Connect the charger to the power cable. -
Page 5: Filling The Tank
www.vectorfog.com OPERATION FILLING THE TANK • Pre-mix the chemicals prior to filling the tank. • Fill the tank with chemical mixture through the solution inlet. • Close the cap of the tank securely to prevent chemical leakage. SOLUTION INLET REMARK The tank capacity is only 2 Liters. -
Page 6: Operating The Unit
www.vectorfog.com OPERATING THE UNIT Turn on the machine by sliding the switch to the ON position. Turn off the machine by sliding the swtich to the OFF position. Adjust the droplet size by turning the nozzle on the front of the machine. - Page 7 www.vectorfog.com CLEANING Clean the fogger after every use to extend the life of the fogger. CLEANUP OF WATER BASED LIQUIDS STEP A When fogging is complete, pour any liquid left in the tank to a suitable container using a funnel. Operate the fogger for one minute with the nozzle opened to the largest droplet size setting (anti-clockwise).
- Page 8 www.vectorfog.com PRODUCT Air-Cap Cap-Nozzle Nozzle-Assy Body-Assy Motor-Assy Battery-Assy...
- Page 9 www.vectorfog.com PRODUCT Battery Invertor Switch-Assy Switch-PCB Check Valve Elbow Hose Tank-Assy Tank-Cap Air-Nipple Water-Nipple Packing Battery Charger Power Cable...
-
Page 10: Specifications
www.vectorfog.com SPECIFICATIONS Configuration DC20 PLUS 480 x 250 x 200mm Dimensions (18.9" x 9.84" x 7.87") 2L (0.5 gal) Tank Capacity Net Weight 3.2 kg (7.05 lb) Nozzle Diameter 2.0Ø Vent Diameter 13Ø Coverage 1,500 sq ft (140 m²) Specifications 2 - 5m (Horizontal) Spray Distance (6.5-16 ft) -
Page 11: Product Guarantee
www.vectorfog.com PRODUCT chlorine releasing chemicals (e.g. peroxides) and other acids should only be used with approved acid resistant equipment models. If not approved GUARANTEE for acid resistance a Ph-value should be limited from 4,5-8,5. After use, fog with some clean water for about 3 minutes to remove any chemicals still left in the system. - Page 12 UK OFFICE | KOREA OFFICE | US OFFICE UK +44 (0)20 3808 5797 KOREA +82 (0)70 4694 2489 US +1 201 482 9835 Info@vectorfog.com www.vectorfog.com...
Need help?
Do you have a question about the DC20P and is the answer not in the manual?
Questions and answers