Related Manuals for Vector Fog BY100
Summary of Contents for Vector Fog BY100
- Page 1 BY100 Mini Fogger Manual © 2021 Vectorfog® is a registered trademark of Vectornate USA Inc.
- Page 2 INSTRUCTION MANUAL When fogging outdoors, you should only fog for short periods at a time and when there is not much wind. When fogging indoors you should start at the furthest part of the building and work your way back until you get to the entrance or exit. It is essential to read the chemical manufacturer’s instructions before you start applying, including diluting ratio and safety precautions.
-
Page 3: Specifications
Thanks to its portability, the BY100 is ideal for fogging pesticides and disinfectants in a multitude of locations such as in homes, patios, parks, silos, chicken coops and greenhouses. -
Page 4: Unpacking The Unit
CHECKLIST BEFORE STARTING THE UNIT Unpacking the Unit When unpacking the unit, please make sure that the machine is not damaged and that all accessories mentioned in this manual are not missing. BY100 Mini Fogger Plastic Manual Shoulder Pump Strap... - Page 5 To Turn Machine On Connect the propane/butane gas cartridge to the main body. Make sure it is locked into position. Turn the gas supply on by turning the valve counter clockwise, as shown in the diagram. To start the machine, press the ignition switch located on the left hand side of the machine.
- Page 6 Part No. Part Name Burner Net Set Burner Control Valve Set Part No. Part Name Jet Nozzle Coil Set 2-3-1 Coil Connecting Bolt 2-3-2 Ring 6mm 2-3-3 Coil Nut 2-3-4 Pump Pipe Pump Set...
- Page 7 Part No. Part Name Chemical Control Valve Set Chemical Tank Part No. Part Name 4-1-1 Chemical Supply Pipe 4-1-2 Ring 4mm 4-1-3 Chemical Supply Pipe Nut (S) 4-1-4 Chemical Supply Pipe Nut (B) Part No. Part Name Insulator Ignition Switch...
- Page 8 Part No. Part Name 6-1-1 Case 6-1-2 Pump Handle 6-1-3 Pump Wire 6-1-4 Ball 6-1-5 Pump Plastic 6-1-6 Pump Spring 6-1-7 Chemical Tank Lid 6-1-8 Chemical Control Handle 6-1-9 Chemical Tank Cover 6-1-10 Cover Molding Safety Net Fuel Tank Gas Control Handle...
-
Page 9: Product Warranty
PRODUCT WARRANTY This product is warrantied for twelve months from the date of original purchase. Any defect that arises due to faulty materials or workmanship will either be replaced or repaired during this period by the seller or authorized distributor from whom you purchased the unit. Transportation charges or duties shall be borne by Purchaser. Purchaser must register the product for warranty coverage on the website (VECTORFOG.COM/WARRANTY). - Page 10 www.vectorfog.com NL OFFICE | KOREA OFFICE | US OFFICE TEL: (NL) +31 (20) 899 0992 | (KOREA) +82 (0)70 4694 2489 | (US) +1 201 482 9835 EMAIL: info@vectorfog.com...
Need help?
Do you have a question about the BY100 and is the answer not in the manual?
Questions and answers