Display Symbols; Entering Characters - Sharp EL-6850 Operation Manual

Display Symbols

: A "beep" will sound when a key is pressed.
: The schedule alarm will sound.
CAPS
: Capital (uppercase) letters will be entered. To enter
small (lowercase) letters, turn "CAPS" off by
pressing .
CAPS
EDIT
: The listing on the display can be edited.
: Indicates that
2nd 2nd
or character shown in yellow (or green) above the
keypad can be used next.
: More information exists above the current display.
(Press .)
: More information exists below the current display.
(Press .)
S : Secret function is in effect. (Secret listings cannot be
recalled without a password.)
: Indicates that the recalled listing is secret.
: Indicates that the operating battery level is low.
BATT
• In this manual, only the symbols necessary for
explanation will be shown.
4
has been pressed. The function

Entering Characters

1. Moving the Cursor
The cursor ( _ or ) can be moved by pressing (or holding
down) , , , or .
2. Entering Characters
(1) Entering Letters and Numbers
After initializing the Organizer, the default setting for entering
letters will be capital (uppercase) letters. To enter small
(lowercase) letters, turn "CAPS" off by pressing
• To enter " ' " or " : ", press
(2) Entering graphic symbols and special characters
Press to display the symbol entry mode, allowing a
SMBL
total of 90 symbols and characters to be selected. To select
the symbol display containing the desired symbol/special
character, press or
NEXT
corresponding to it.
• The first display is determined by your previous choice.
The 5 most recently used symbols/special characters are
stored and displayed on this display.
Press to exit the symbol entry mode.
SMBL
CAPS
,
:
or after pressing
, then press the number
PREV
.
.
2nd