Sharp Actius PC-MC22 Operation Manual page 91

Activating the Wireless LAN Antenna
To communicate using the wireless LAN, the integrated antenna must be activated.
You can enable/disable the antenna by pressing the Fn+F1 (
When the antenna indicator (
indicator light is off, it is disabled.
Wireless LAN
Antenna Indicator
Disable the antenna on airplanes and in specific places where radio-
susceptible equipment is nearby such as medical and electrical
equipment. Electric waves generated from the antenna may affect the
performance of the devices and cause malfunction of the devices.
When the Wireless LAN of the APM button is set to ON or OFF, pressing
the APM button will turn on or off the wireless LAN antenna according to
the APM button setting. (For more information, refer to the Using the
Advanced Power Management Button section on page 2-9.)
Connecting to a Network via an Access Point
You can connect the computer to the Internet or a wired network via an access point
supporting IEEE802.11b or IEEE802.11g. For details on the access point, refer to its
manual or consult your network administrator.
This section describes how to communicate or access to the Internet through the
access point.
) lights green, the antenna is enabled. When the
Operation Manual
) key combination.
Wireless LAN
Antenna (Invisible)
4-11
4