Maintenance And Care - Sharp Actius PC-GP22W Operation Manual

Sharp actius pc-gp22w: operation manual
Hide thumbs Also See for Actius PC-GP22W:
Table of Contents

Advertisement

Uninstalling the Memory Module
1.
Follow steps 1-2 of Installing the Memory Module and turn over the sheet.
2.
Slightly bend the two latches outward until the memory module is released.
3.
Remove the memory module and follow steps 5-8 of Installing the Memory
Module.

Maintenance and Care

This section provides you with information on how to maintain the computer in
excellent working condition.
Replacing Backup Battery
• Danger of explosion if battery is incorrectly replaced. Replace only
with the same or equivalent type recommended by the equipment
manufacturer.
• Discard used batteries according to manufacturer's instructions.
Your computer is equipped with a backup battery, which will keep the information of
the Setup Utility, etc safe. If you see the message Press F1 to Continue, Del to Load
CMOS default, replace the backup battery with a new one. You can purchase a new
backup battery from your local dealer.
1.
Turn off the computer, and remove the AC adapter, the battery pack and
peripheral devices. See Chapter 3 for removing the battery.
Make sure to turn off your computer and remove the AC adapter and the
battery pack. Otherwise the computer may malfunction.
A-4

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pc-gp2 series

Table of Contents