Set Timer to Enter System Standby/Hibernate Automatically
Your computer will enter System standby/hibernate automatically when the specified
time has passed without any operation. To set the time:
1.
In the Power Options Properties dialog box, select Power Schemes tab.
2.
From the pull-down menu in System standby or System hibernates, select the
time after which the computer will enter System standby/hibernate.
3.
Click OK.
4.
Close the Control Panel window.
Entering System Standby/Hibernate
Your computer enters System standby/hibernate in one of the following cases:
•
You select Stand By or Hibernate(which replaces Stand By when you press Shift
key) in the Turn off computer dialog box. To open the dialog box, click start –
Turn Off Computer.
•
The specified time in System standby or System hibernates in Power Schemes tab
of Power Options Properties dialog box has passed without any operation. (See the
previous section.)
•
The screen cover is closed.
The above functions if you perform the following:
1.
In the Power Options Properties dialog box, select Advanced tab.
2.
Select Hibernate or Stand by in When I close the lid of my portable computer.
3.
Click OK.
4.
Close the Control Panel window.
•
You press the power button.
The above functions if you perform the following:
1.
In the Power Options Properties dialog box, select Advanced tab.
2.
Select Hibernate or Stand by in When I press the power button on my
computer.
3.
Click OK.
4.
Close the Control Panel window.
3
3-9