Microphone Module - Lenovo IdeaCentre AIO 3 Hardware Maintenance Manual

9. Remove two screws to detach the camera module from the camera bezel.
10. Disconnect the camera cable from camera module.
11. Remove two screws to detach the camera holder link from the camera back cover.
12. Install the new camera module.
13. Reinstall the removed parts in reverse order of the removal steps mentioned above.
14. Reconnect all disconnected cables to the computer and reconnect the power cord to the electrical
outlet.

Microphone module

Prerequisite
Before you start, read Chapter 1 "Important safety information" on page 1 and print the following
instructions.
.
Chapter 6 Hardware removal and installation
67