Sharp AL-1642CS Operation Manual page 69

E: Misfeed in the SPF
An original misfeed may occur at one of three locations: if the misfed original is seen
from the document feeder tray, (A) in the document feeder tray; if the misfed original
is not seen from the document feeder tray, (B) in the exit area or (C) under the
document feeder cover. Remove the misfed original following the instructions for
each location.
(A) Open the document feeder cover and pull the original gently to the left and
out from the document feeder tray. Close the document feeder cover. Open
and close the SPF to clear the SPF misfeed (
original cannot be easily removed, proceed to (C).
(B) Open the SPF and rotate the roller to remove the misfed original from the
exit area. If the misfed original cannot be easily removed, proceed to (C).
(C) If the original does not move easily into the exit area, remove it in the
direction of the arrow while rotating the knob.
A number may appear in the display after a minus sign, indicating the
number of the originals that must be returned to the document feeder
tray. Open and close the SPF to clear the SPF misfeed (
and then return the required number of originals. Then press the start
( ) key to resume copying.
) indicator. If the misfed
Document feeder cover
Roller
) indicator,
8
67