Bypass Feed (Including Special Paper) - Sharp AL-1642CS Operation Manual

BYPASS FEED (including special paper)

The multi-bypass tray can be used to feed standard paper, transparency film, labels,
envelopes, and other special purpose paper. Paper measuring from 3-1/2" x 5-1/2"
to 8-1/2" x 14" and in the weight range of 14 lbs. to 34.5 lbs. (52g/m
be used in this tray. (For paper weighing from 28 lbs. to 34.5 lbs. (105g/m
2
128g/m ), 8-1/2" x 11" is the maximum size.)
• The multi-bypass tray can hold maximum of 50 sheets of paper.
(Capacity will vary depending on the type of paper loaded.)
• The original image must be smaller than the paper or media for
copying. If the original image is bigger than the paper or media, this
may cause smudges on the edges of the copies.
The multi-bypass tray
1
Open the multi-bypass tray and extend the tray.
To close the multi-
bypass tray,
perform step
and then step
in the illustration
and push the
round projections
at the right of the
tray until they
click.
1
2
2 2
to 128g/m ) can
2
to
3
17