User Programs; (Power Save Modes, Auto Clear Time); Setting The Power Save Modes And Auto Clear Time - Sharp AL-1000 Operation Manual

TONER SAVE MODE
Press and hold down the exposure mode selector key for approximately 5 seconds.
2
The manual (
blink. The exposure indicator marked "5" will light up, indicating the standard toner
mode is active.
To enter the toner save mode, press the light (
3
The exposure indicator marked "1" will light up, indicating the toner save mode is
selected.
4
Press the exposure mode selector key twice. The photo (
4
blinking and the AUTO indicator will light up steadily. The toner save mode is now
active.

USER PROGRAMS

(power save modes, auto clear time)

The user programs allow the parameters of certain functions to be set, changed, or canceled
as desired.

Setting the power save modes and auto clear time

Press and hold down the light (
1
than 5 seconds until all the alarm indicators (
the display.
Use the left copy quantity (
2
time, 2: preheat mode, 3: auto power shut-off timer, 5: auto power shut-off mode).
The selected number will blink in the left side of the display.
24
) indicator will go out and the photo (
To return to the standard mode, repeat the procedure but use the dark (
key to select exposure level "5" in step 3.
) key.
) and dark ( ) keys simultaneously for more
, ,
) key to select a user program number (1: auto clear
) indicator will begin to
) indicator will stop
) blink and "– –" appears in
)