Table of Contents
Advertisement
System board
4-pin power connector
1
Microprocessor socket
3
Coin-cell battery
5
M.2 solid-state drive slot 1
7
Memory slots (2)
9
6-pin power connector
11
Thermal sensor connector
13
PCIE x16 connector
15
Front USB 2.0 connectors (2)
17
Removing and installing hardware
This section provides instructions on how to remove and install hardware for your computer. You can expand
the capabilities of your computer and maintain your computer by removing or installing hardware.
Attention: Do not open your computer or attempt any repair before reading and understanding the Chapter
1 "Important safety information" on page 1.
External options
You can connect external options to your computer, such as external speakers, a printer, or a scanner. For
some external options, you must install additional software in addition to making the physical connection.
When installing an external option, see Chapter 3 "Product overview" on page 29 to identify the required
connector. Then, use the instructions that come with the option to help you make the connection and install
any required software or device drivers.
54
IdeaCentre 3 Hardware Maintenance Manual
Microprocessor fan connector
2
Card reader header
4
Front panel connecctor
6
M.2 solid-state drive slot 2
8
SATA 3.0 connectors (2)
10
SATA power connector
12
LPT header
14
PCIE x 1 connector
16
Clear CMOS (Complementary Metal Oxide
18
Semiconductor)
Advertisement
Table of Contents
