Table of Contents
Advertisement
CAMERA SETTING
B2
Setting the alarm duration for each camera
1
Press the MENU button twice to display the (TIMER
SET) menu, then check that the day and night periods
are set as desired. (For more information on the day
and night periods settings, see "TIMER SET" on page
27.)
2
Press the MENU button twice to display the (ALARM
SET) menu.
3
Using the + (or –) button, set "INDIV." for the
"DURATION" item.
NOTE: In the (CAMERA SET) menu, the item
"AL.DURATION" will only be displayed if the
"DURATION" item is set to "INDIV.".
4
Press the MENU button three times to display the
(CAMERA SET) menu.
5
Press the SELECT (1 – 9) button to select the desired
camera (ex: camera 5).
6
Press the l button to highlight the "AL.DURATION"
setting.
1 Press the + (or –) button to set the desired duration
(ex: 20 sec.) in the DAY column, then press the c
button.
2 Press the + (or –) button to set the desired duration
(ex: 30 sec.) in the NIGHT column.
If there is an alarm triggered, the alarm duration will be as
set for each camera.
7
Press the MENU button to go to the next menu
screen, or
Press the EXIT button to exit the menu display.
CAMERA SET menu
AL. DURATION
(Default setting: DAY and NIGHT to 10 S)
If in the (ALARM SET) menu, the item "DURATION" is set to
"INDIV.", enter the desired alarm duration for each camera.
The available durations are:
1, 2, 3, 4, 5, 10, 20 (in 10 seconds increments)... 180, CC,
NC, OFF
CC: The alarm will go on as long as the alarm signal is
received (minimum 1 second).
NC: The alarm will continue until reset.
OFF: No alarm duration setting.
1
MENU
2, 3
MENU
4
MENU
38
Menu 7
5, 6
5
English
Advertisement
Table of Contents
