Wall mount
Note
•
Improper wall mounting may result in accident,
injury or damage. If you have any query, contact
Consumer Care in your country.
•
Before wall mounting, make sure the wall can
support the weight of your soundbar.
•
Before wall mounting, you need not remove the
rubber feet at the bottom of the soundbar,
otherwise the rubber feet cannot be �xed back.
•
Depending on the type of wall mounting, make
sure that you use screws of a suitable length and
diameter.
•
Please check whether the USB port on the back of
the soundbar is connected to a USB device. If it is
found that the connected USB device affects the
wall-mount, you need to use another USB device
of the appropriate size.
Screw length/diameter
2.5-3mm/0.09-0.12"
>28mm/1.2"
Suggested wall mounting height
You are recommended to install the TV
�rst before wall mounting the soundbar.
With a TV preinstalled, wall mount the
soundbar 50mm/2.0'' in distance from
the bottom of the TV.
WARNING !
•
To prevent injury, this apparatus must be securely
attached to the �oor/wall in accordance with the
installation instructions.
•
Suggested wall mounting height:≤ 1.5 meters.
10
EN
4mm/
0.16"
1
~50mm/2.0"
600mm / 23.62"
2
3
1
Drill 2 parallel holes (diameter 3-8mm
each according to wall type) on the
wall.
The distance between the holes
are: 600mm / 23.62"
You can use the wall mount
template provided for helping the
drilling holes position on the wall.
2
Secure the dowels and screws in the
holes.
Be sure to leave a 2.5-3mm gap
between the wall and the screw's
head.
3
Attach the wall brackets (x2) into the
back of the unit.
4
Hang the soundbar on the fastening
screws.
2.5-3mm/0.09-0.12"
4mm/
0.16"
>28mm/1.2"
4