Husqvarna BMS 280P Operator's Manual page 15

General product maintenance
Do a check of the wear and sharpness of the blade.
Make sure that all electrical connectors are clean.
Make sure that the engine is clean.
Clean the external surfaces of the product.
Do a general inspection.
Make sure that all screws and nuts are tightened with the correct torque.
Do a check for oil leaks.
Do a check of the wear and function of the front wheels.
Replace the hydraulic oil. Refer to
filter on page 20 .
Do a complete servicing and cleaning of the product.
Clean the internal components of the product.
Engine maintenance
Do a check of the engine oil level.
Examine the air filter. Clean the air filter if it is necessary.
Clean the air filter.
Replace the engine oil and the oil filter.
Replace the air filter.
Clean the cooling fins of the engine
To do a general inspection
• Make sure that the nuts and screws on the product
are tightened.
• Make sure that the cables on the product are not in a
position where they can become damaged.
• Examine the electrical parts for damage. Do not
operate a product that has damaged electrical parts.
To clean the product
• Always clean all the equipment after use. Use a
vacuum cleaner.
• Do not use a high-pressure washer to clean the
product.
1998 - 001 - 03.07.2023
To replace the hydraulic oil and hydraulic oil
Daily
Daily
• Keep the air openings clean and clear to make
sure that the product always has sufficiently cool
temperature.
To clean the engine and the muffler
CAUTION:
manual of the propane engine before you do
maintenance in the product.
• Let the engine become cool before you clean it.
• Clean the engine with a cloth.
• Make sure that the cold air intake grille is not
blocked. Remove dirt with a soft brush.
Each
Week- 12
ly month
s
X
X
*
X
X
X
X
X
X
O
O
Each
Week- 12
ly month
s
X
X
X
X
X
O
Always read the service
12 h
after
servic-
ing
X
12 h
after
servic-
ing
15