Sanyo HT32744 Quick And Easy Setup

Quik 'N Easy Setup
st
1
CONNECT SIGNALS TO THE TELEVISION
DIGITAL ANTENNA IN
Your TV can receive and display ANY resolution
being broadcast. The signal makes the difference.
Note: 480i / 480p / 720p / 1080i Resolutions—
Depends on broadcasting stations and
content providers. Press the INFO key to
determine the resolution being received.
DIGITAL
ANTENNA IN
ADDING NEW DIGITAL CHANNELS TO THE DATABASE
DIGITAL ADD-ON SEARCH
Use this feature to add new digital channels or
to add digital channels who's broadcast towers
are in opposite directions from your location.
If necessary, after the initial search, turn the
antenna and use the On-Screen Menu to per-
form a Digital Add-on Search. Repeat these
steps for each direction in which there are trans-
mitting towers.
A Digital Add-on Search may take several min-
utes to complete.
PICTURE SHAPE
Several factors affect picture shape.
Such as, the aspect ratio of the
broadcast image, the aspect ratio of
the original program material, and
the aspect ratio of the display screen.
Identifying Picture Shapes
Letter Box—This term is used to
describe a 16:9 ratio image dis-
played on a 4:3 aspect ratio screen.
UHF/VHF/CATV IN
Connect an Antenna, Analog Cable, or
Satellite Receiver to this terminal.
Note: The only resolution available from any
of these connections is 480i.
UHF/VHF/CATV
1. Select a digital channel (digital channels
have a "D" prefix, such as, D03).
2. Press MENU.
3. Use the CURSOR keys to highlight the
Antenna icon.
4. Press ENTER.
5. Use the Up/Down CURSOR keys to high-
light Digital Add-on Search.
6. Press ENTER.
7. Use the Down CURSOR key to choose Yes.
8. Press ENTER to begin searching for new
digital channels.
Pillar Box—This shape results
when 4:3 aspect ratio material is dis-
played on a 16:9 aspect ratio screen.
Postage Stamp—This condition
occurs when an original 4:3 aspect
ratio program is broadcast as a
16:9 aspect ratio program, then
displayed on a 4:3 aspect ratio
screen. This causes the image to
display in the center of the screen
with a black border.
2
BEGIN CHANNEL SEARCH
Note: Before beginning channel search, point
1. Press POWER.
2. Press CHANNEL UP to start Channel
Search.
cc cc
The PIX SHAPE key can be used
to Zoom the center of the image to
fill the screen. (The sides of a nor-
mal 16:9 image will be cut off.)
Use the PIX SHAPE key to adjust
the image size or shape to suit your
personal preferences. Not all shapes
will be available for all broadcasts.
AS
Call Us, We Can Help!
1-800-877-5032
www.sanyotv.com
nd
SEARCH FOR
CHANNELS
your antennas toward the transmitting
tower(s). For tower information you
can log onto www.antennaweb.org,
type in your zip code and get a listing
of the tower coordinates in your area.
The channel search process may take
several minutes. Please be patient.
First
Please connect all signals
and antennas to jacks and
the terminals on the back.
Then press the Channel UP key.
Channel Channel
Channel Search Channel Search
Digital Cable Search Digital Cable Search
Digital Add-on Search Digital Add-on Search
Antenna Selection Antenna Selection
Channel Scan Memory Channel Scan Memory
Initial Channel Initial Channel
Move Move ENTER ENTER Select Select MENU MENU Back Back
Options will vary by model, due to
aspect ratio differences.
Normal is the term used to describe
programming that is broadcast in
its original aspect ratio (4:3 or
16:9) and displayed on a screen
with the same aspect ratio as the
original program material.
Part Number: 1JC6P1P0184--
EXIT EXIT E x i t E x i t