Stereo Amplifier; Video1 Analog Av Connections; Vcr (Or Other Analog Device) - Sanyo DP50747 Owner's Manual

CONNECTING A STEREO
AMPLIFIER TO THE HDTV
AUDIO OUT JACKS
1 Connect a Stereo Amplifier to the HDTV Audio
Out jacks as shown.
NOTE: Do not connect external speakers directly to
the HDTV.
(Cable not
supplied.)
BACK VIEW OF HDTV
OPERATING TIPS:
I
Position your HDTV at least 2 feet from stereo
speakers. The magnets in the speakers may
affect the picture quality.
I
For Mono VCR (Single Audio Jack), connect
VCR Audio Out to HDTV Audio (L) Input.
I
"No Signal" will appear randomly on the
screen when no signal is detected at the
VIDEO1 video jack.
(FIXED ANALOG)

STEREO AMPLIFIER

Need help?
VIDEO 1
(COMPOSITE-YELLOW)
A Good Picture
or (S-VIDEO)— A Better Picture
Connect an analog device, such as, an Analog
Cable Box, Satellite Receiver, or VCR
1 Connect a Composite Cable to the VIDEO1
Yellow, White, and Red AV jacks as shown.
2 2
OPTIONAL
Connect analog device to the HDTV S-Video
In Jack, if S-Video output is available on your
external analog device.
NOTE: S-Video jack connection overrides a Video jack
connection (VIDEO 1).
INPUT
3 Press
DVD or VCR program.
IMPORTANT FACTS:
Don't be confused by the phrase "Available in
High-Definition." Composite jacks offer only 480i
(SDTV) resolution.
AV
JACKS
HDTV AV (VIDEO 1) INPUT JACKS
www.sanyoctv.com
Visit our Web site at
—
to select Video 1 to view the
ANALOG DEVICE
(Cables not
supplied.)
S-VIDEO
JACK
(OPTIONAL)
1-800-877-5032
or Call
9