Recording; Basic Recording; Basic Recording From A Tv; Instant Timer Recording - Sanyo DRW-1000 Instruction Manual

Basic Recording

Basic Recording from a TV

Follow the instructions below to record a TV program.
Recording starts immediately and continues until the disc or
tape is full or you stop the recording.
1 1
Switch on the VCR/DVD Recorder, select the
device (VCR or DVD) for Recording and load a
recordable disc or tape.
Also make sure that the TV input is set to this VCR/DVD
Recorder. If you load a completely blank DVD-RW disc,
the Disc initialize menu will appear. Select a desired
Recording Mode to initialize the disc (See page 24).
2 2
Set a recording mode as necessary by pressing
REC MODE repeatedly.
DVD: SP (Standard quality), LP (Low quality),
XP(High quality)
VCR: SP (Standard Play), SLP (Super Long Play)
3 3
Use CHANNEL (v/V) on the front panel or
CH/TRK(v/V) on the remote control to select the
TV channel to record.
4 4
Use AUDIO to select the audio channel to
record.
The table below shows what will be recorded on the differ-
ent settings for different types of broadcast. The last col-
umn (Monitor Audio) shows what you'll hear as it is

recording.

• If you set the audio channel to SAP, but there is no
SAP channel being broadcast, the main audio (mono or
stereo) will be recorded.
TV Broadcast Selected Audio
MONO MONO
STEREO STEREO
Left
Right
MONO
MONO+SAP MONO
SAP
STEREO+SAP STEREO
SAP
MONO
5 5
Press REC (z) once.
Recording will start. (The REC indicator lights in the
display window.)
Recording continues until you press STOP (
disc (or tape) is full.
To record for a fixed length of time, see Instant Timer
Recording on right.
6 6
Press STOP (x) to stop recording.
ote
The maximun DVD recordings (titles) is 99.
If the VCR/DVD Recorder is powered off during DVD
recording, the recording will not be saved.

Instant Timer Recording

Instant Timer Recording allows you to easily make a
recording of a preset length without using the program
timer.
Checking the Recording Time
Press REC (z) or DISPLAY once to check the record-
ing time. The recalled setting will automatically return to
the TV screen for a moment.

To Extend the Recording Time

The recording time can be extended anytime by press-
Broadcast Audio Monitor
ing REC (z).
L Ch R Ch Audio
Each subsequent press increases the recording time by
MONO MONO MONO
10 minutes (DVD) or 30 minutes (VCR), depending on
L R STEREO
free space.
L L Left

To Pause the Recording

R R Right
MONO MONO MONO 1 Press PAUSE/STILL (X) to pause the disc during
MONO MONO MONO
2 When you want to continue recording, press
SAP SAP SAP
L R STEREO
SAP SAP SAP
MONO MONO MONO
x
) or the

To record one TV program while watching another

1 Press TV/VCR to select the TV mode during recording.
2 Using the TV, select the channel to be viewed.
Always use PAUSE/STILL (
changes during recording.
For example: To change channels during recording, first press
PAUSE/STILL (
mode, then select the desired channel on the VCR/DVD
Recorder and press PAUSE/STILL (
recording.
1 1
Follow steps 1-4 as shown on the left (Basic
Recording from a TV).
2 2
Press REC (z) repeatedly to select the record-
ing time length.
Recording starts after the first press.
DVD: Each subsequent press increases the recording
time by 10 minutes (maximum 240 minutes) within free
space.
VCR: Each subsequent press increases the recording
time by 30 minutes (maximum 540 minutes). Please con-
firm the VHS tape has enough remaining time to be
recorded before recording.
Input: Ch. 6
MONO
SP
Input: Ch. 6
MONO
Instant Timer Record Menu
recording.
PAUSE/STILL (X) or REC (z).
ote
• If you press PAUSE/STILL (X) during the Instant
Timer Recording, it will be canceled.
• The VCR/DVD Recorder will automatically power off
when the Instant Timer Recording ends.
The TV indicator appears.
ips (VCR mode only)
X
) for best results when making
X
) to put the VCR/DVD Recorder in pause
DVD
02H 01M Free 00:09:05
30min Rec
VCR
SP
00:17:32
120min Rec
X
) again to resume
39