Operations With Dvd; Playing A Dvd; Playback Setup; Moving To Another Title - Sanyo DRW-1000 Instruction Manual

Operations with DVD

Playing a DVD

Playback Setup

Before using the remote control, press the DVD but-
ton to select the device to be operated.
Turn the TV on and select the video input source con-
nected to the VCR/DVD Recorder.
Audio system: Turn the audio system on and select
the input source connected to the VCR/DVD
Recorder.
1 1
Press OPEN/CLOSE (Z) to open the disc tray.
2 2
Load a disc in the tray with the playback side
down.
3 3
Press OPEN/CLOSE (Z) to close the tray.
READING appears on the display window and
playback starts automatically. If playback does not
start, press PLAY (N).
In some cases, the disc menu might appear
instead.
ip
If a menu screen is displayed
The menu screen may be displayed first after loading a
DVD which contains a menu.
DVD-Video
Use the b / B / v / V buttons to select the title/chap-
ter you want to view, then press ENTER to start play-
back. Press TITLE or DISC MENU/LIST to return to
the menu screen.
Menu settings and the exact operating procedures for
using the menu may differ depending on the disc.
Follow the instructions on each menu screen.
otes
If Parental Control is set and the disc is not within the
Movie Rating settings (not authorized), the 4-digit
code must be entered and/or the disc must be author-
ized (see "Movie Rating", on page 22).
DVDs may have a Region Code.
Your VCR/DVD Recorder will not play discs that have
a region code different from your VCR/DVD Recorder.
The region code for this VCR/DVD Recorder is 1
(one).
30
ote
Unless stated otherwise, all operations described use
the remote control. Some features may also be avail-
able on the Setup menu.

Moving to another TITLE

DVD-Video DVD-RW VR
1/6
DVD-R
When a disc has more than one title, you can move to
another title as follows:
Press DISPLAY twice and use v / V to select the title
icon. Then, press the appropriate number button (0-
9) or b / B to select a title number and press ENTER
to confirm.
Moving to another CHAPTER
DVD-Video DVD-RW VR
4/26
DVD-R
When a title on a disc has more than one chapter, you
can move to another chapter as follows:
Press SKIP (. or >) briefly during playback to
select the next chapter or to return to the beginning of
the current chapter/track.
Press SKIP (.) twice briefly to go back to the pre-
vious chapter.
To go directly to any chapter during playback, press
DISPLAY twice. Then, use v / V to select the chapter
icon. Then, enter the chapter number using the num-
ber buttons (0-9) or press b / B and press ENTER.

Slow Motion

DVD-Video
DVD-RW Video DVD-R
1 Press REW (m) or FF (M) during pause mode.
The VCR/DVD Recorder will enter SLOW mode.
2 Use the REW (m) or FF (M) to select the required
speed: t 1/16, t 1/8, t 1/4, t 1/2, or T 1/16,
T 1/8, T 1/4, T 1/2.
3 To exit Slow Motion mode, press PLAY.
DVD-RW Video
DVD-RW Video
DVD-RW VR