Installing The Usb Driver - Sanyo DMP-M1200 Instruction Manual

Installing the USB driver

If you are using Windows 98/98SE, you need to install the USB driver.
• There is no need to install the USB driver, if you are using Windows XP/2000/ME.
• Reproduction of this driver is forbidden.
• This driver shall not be copied and reprinted.
• SANYO shall not be liable for any damages arising out of the use of this driver.
1. Turn on your PC and Windows is started. Do not connect the unit to the PC yet.
2. Load the USB driver CD-ROM (supplied)
in the CD-ROM drive of the PC.
[InstallShield Wizard] screen appears
automatically.
Note:
If the screen is not displayed, right-click
[Start], select [Explore].
Double click "setup.exe" file in the CD-
ROM. [InstallShield Wizard] screen
appears.
3. Click [Next].
4. Check that [Yes, I want to restart ...] is
selected, then click [Finish]. The PC will
restart.
7 [ENGLISH]